Agenda -11-06-2008 - 4p - Laserfiche WebLink

Browse Search

1.36 Subcontractor - A person, firm, or-corporation who has entered Into'a direct contract with the Contractor to perform any of the Work at the Project. 1.37 Submittal -- Shop drawings, product data, samples, and other documents required by the Contract Documents to be submitted by the Contractor to the CMAR and the Designer. 1.38 Submittal Register.- See paragraph 13.2 of these General Conditions. 1.39 Substantial Completion - The point at which the Work, and Work by other Contractors on or In connection with the Project, as determined by the Designer, Is sufficiently complete in accordance with the Contract Documents that it can be beneficially occupied by the Owner, and the Work can be utilized by the Owner for its intended use, and all necessary permits -and permissions for Beneficial Occupancy and utilization having been obtained by. the Contractor.- Ail. operations and maintenance manuals, Owner training, and as -built drawings must be submitted prior to Substantial Completion being achieved. 1.40 Sub- subcontractor - A person or entity that has a direct or indirect contract with a Subcontractor to perform any of the Work at the Project 1.41 Work - The construction and services required by the Contract Documents, including all labor, materials, equipment, and services provided or to be provided -by the Contractor to fulfill the Contractor's obligations. 1.42 All references in the Contract Documents to the masculine shall be interpreted as including the feminine or, neuter and all references in the Contract Documents to the singular or the . plural shall be interpreted as including the other, as may be appropriate in the reasonable interpretation of the Contract Documents. ARTICLE 2. CORRELATION, INTERPRETATION AND INTENT OF CONTRACT DOCUMENTS 2.1 It is the intent of the Specifications and Drawings and other Contract Documents to describe.a complete Project in accordance with the Contract Documents. 2.2 The Contract Documents are complementary, what is called for by one Is as binding.as if , called for by ail. If the Contractor finds a conflict, error or discrepancy in the Contract Documents, the Contractor shall notify the CMAR in writing before proceeding with the Work affected thereby. In resolving such conflicts, errors and discrepancies, the Contract Documents shall be given preference in the following order: Construction Agreement,. Modifications, Addenda, Supplemental Conditions, General Conditions, Specifications, and Drawings.. Figure dimensions on Drawings shall govern over scale dimensions, and detailed Drawings shall govern over general Drawings. Any Work that may reasonably be inferred from the Contract Documents as being required to produce the intended result . shall be supplied whether or not it is specifically called for. Work, materials or equipment described in words which, so applied, have a well known technical trade meaning shall be deemed to refer to such meaning and to incorporate any recognized standards which are a part of such meaning. . 2.3 Miscellaneous items, accessories and work which are not specifically mentioned, but which are essential to produce a complete and properly operating .installation, or useable structure or plant providing the indicated function shall be furnished and installed without change in the Contract Price.- Such miscellaneous items and accessories shall be of the same quality standards, including material, style, finish, strength, class, weight and other _ applicable characteristics, as specked for the major component of which the miscellaneous - _ item or accessory is an essential part, and shall be approved by the Designer before installation. This requirement is not intended to include major components not covered by' - or inferable from the Contract Documents. GENERAL CONDITIONS FOR GM AT RISK PROJECT 6 of 42 JUNE 2007 EDITION