Agenda - 11-22-1999 - 1 - Laserfiche WebLink

Browse Search

i ~t 2 Schools. In OI-3 and MH "P" Permitted as a Principal Use, "S" Petxnitted as a Special Use. For existing Elementary and Secondary Schools "P" Permitted as a Principal Use." Section 5. Subsection 13.11.1, Use ~ Group A; Subsection 13.11.2, CJse Group B; Subsection 13.11.3, Usa Group C, Schedule of Intensity Regulations are hereby amended to provide for a new zone called MH, the same requirements as the current RT provisions. Section 7..Section 19.2 of the Chapel Hill Development Ordinance is hereby revised by adding the following language at the end: "g} Any development of a Solid Waste Management Facility on a zoning loi." Section 8. The first paragraph of Section 14.12.2 of the Chapel HiA Development Ordinance is hereby amended to read as follows: . "A buffer is a strip of land together wide the screening required thereon. Except as otherwise specifically provided in this chapter, the type of buffer required between a proposed dcvcIopmient and adjacent streets, land uses or zoning designations shall be as' specified in Subsection 14.12.6, Schedule of Requund Buffers. Where the proposed development site and the adjacent land are both located within eitlicr Town Cerncr District, no bu$'er shall be required. When the proposed development site is located is the Rcsidrntial-High. Density-12 zoning district, no buffer shall be required. Where the proposed development site is located in the Materials Handing (MI•i) zoning district, a 200 foot lazidscape bufferyard shall be required." Section 9. Section 14.13.7 of the Chapel Hill Development Ordinance is hereby amended to read as follows: "14.13.7 ~ .Signs in Residential, Materials Handling, and Rural Transition Districts and in PD H Developments ' No sign shall be erected or displayed in any Residential, Materials Handling, or Rural .Transition district or in any Phoned Development-Housing except as allowed under subsection 14.13.4 or as provided below: Section l I.Development identification signs containing the name and/or logo of a subdivision, multi-family development, or planned development, _ provided such signs are limited to one free-standing sign at each principal point of access to the development, sixteen (1~ square feet in area per display surface, and a maximum height of six {~ feet above finished grade; or two (2) signs mounted on wooden, brick, or stone . entry walls, eight {8) square feet per display surface, and a maximum height of six {~ feet above finished grade. Section 11.Nonresidential signs identifying nonresidential uses permitted as a .principal or special use in Residential, Materials Handling, or Rural