Orange County NC Website
Browse       Search
<br />Name: Dorothy Baldwin. page 3 <br />Address: 1709 Ruseh Rd. <br />City; Chapel Hill, T1.C. 2751( <br />:Phone: 967-2350 <br />Date: January 2, 20Q8 <br />FOUNDATION WORK:: <br />1 Apply afiber-bonding foundation coating to;all exterior block walls.. <br />Homeowner to choose white or gray color. Fill all large cracks with <br />masonry filler before applying fiber stucco fo walls. Apply a <br />minimum of two (2) coats. Stucco to cover canipletely. <br />Nate: All cracks that extend through,the foundation wall. shall he` <br />coated on both sides of the foundation wall. -The coating shall extend <br />a minimum of 24"past. both sides of crack. (' Oft section}. <br />2. Place two (2) tandem loads (24 yards) of soil around the foundation,. <br />Refer to Rehabilitation Specialist for location- Driveway side, front, <br />left front side. Slope soil away from unit and level smooth. <br />Install pine needles along the front. Seed and stxaw-.all exposed.. <br />soil.. Pine needles to cover completely.. <br />3_ Install two.{2} large vent wells on the driveway side. Attach the:. <br />vent wells to the foundation with masonry screws. <br />4.- Carefully remove the existing foundation vents. Install automatic <br />foundation. vents around the unit. Note: Install foundation vents <br />before the foundation coating is applied. <br />5. Install drain file on the,right foundation wall. (Driveway side) <br />Dig to the footing or the bottom of the block foundation. <br />Ditch to be a minimum of 24" wide. Apply two coats of foundation <br />water-proa:fng, stone, landscape fabric or drain.tile sock. Note: <br />'The drain: file shall be solid pipe when it reaches the corner. <br />The gutter downspout niay connect to drain. file and. discharge in <br />front yard. <br />ELECTRICAL: <br />1. Rewire the house to code. Install a 200 amp :service panel, meter basa, <br />GFI receptacles, arc-fault breakers, hard-wired smoke detectors. Install; new <br />switches, receptacles and plate: covers.. Note: All work to meet <br />the current Electrical Cade. Note: Remove all accessible old wire. <br />