Orange County NC Website
Browse       Search
Orange County Emergency Services -Generator <br />PDC Project 24030 Product Requirements 01 60 00 - 2 <br />B.If special precautions are required,attach instructions prominently and legibly on outside of <br />packaging. <br />C.Coordinate schedule of product delivery to designated prepared areas in order to minimize site <br />storage time and potential damage to stored materials. <br />D.Transport and handle products in accordance with manufacturer's instructions. <br />E.Transport materials in covered trucks to prevent contamination of product and littering of <br />surrounding areas. <br />F.Promptly inspect shipments to ensure that products comply with requirements,quantities are <br />correct,and products are undamaged. <br />G.Provide equipment and personnel to handle products by methods to prevent soiling,disfigurement, <br />or damage,and to minimize handling. <br />H.Arrange for the return of packing materials,such as wood pallets,where economically feasible. <br />3.03 STORAGE AND PROTECTION <br />A.Designate receiving/storage areas for incoming products so that they are delivered according to <br />installation schedule and placed convenient to work area in order to minimize waste due to <br />excessive materials handling and misapplication. See Section 01 74 19. <br />B.Store and protect products in accordance with manufacturers'instructions. <br />C.Store with seals and labels intact and legible. <br />D.Store sensitive products in weathertight,climate-controlled enclosures in an environment favorable <br />to product. <br />E.For exterior storage of fabricated products,place on sloped supports above ground. <br />F.Protect products from damage or deterioration due to construction operations,weather, <br />precipitation,humidity,temperature,sunlight and ultraviolet light,dirt,dust,and other <br />contaminants. <br />G.Comply with manufacturer's warranty conditions,if any. <br />H.Cover products subject to deterioration with impervious sheet covering. Provide ventilation to <br />prevent condensation and degradation of products. <br />I.Prevent contact with material that may cause corrosion,discoloration,or staining. <br />J.Provide equipment and personnel to store products by methods to prevent soiling,disfigurement, <br />or damage. <br />K.Arrange storage of products to permit access for inspection.Periodically inspect to verify products <br />are undamaged and are maintained in acceptable condition. <br />END OF SECTION 01 60 00 <br />Docusign Envelope ID: DEDB83DA-7916-8AE5-81B0-AA1EA4D56AE9