Orange County NC Website
Browse       Search
Orange County Emergency Services -Generator <br />PDC Project 24030 Engine Generators 26 32 13 - 2 <br />F.Evidence of qualifications for installer. <br />G.Evidence of qualifications for maintenance contractor (if different entity from installer). <br />H.Manufacturer's Installation Instructions: Indicate application conditions and limitations of use <br />stipulated by product testing agency. Include instructions for storage,handling,protection, <br />examination,preparation,installation,and operation of product. <br />I.Manufacturer's factory emissions certification. <br />J.Manufacturer's certification that products meet or exceed specified requirements. <br />K.Source quality control test reports. <br />L.Provide NFPA 110 required documentation from manufacturer,including but not limited to: <br />1.Certified prototype tests. <br />2.Torsional vibration compatibility certification. <br />3.NFPA 110 compliance certification. <br />4.Certified rated load test at rated power factor. <br />M.Manufacturer’s detailed field testing procedures. <br />N.Field quality control test reports. <br />O.Operation and Maintenance Data: Include detailed information on system operation,equipment <br />programming and setup,replacement parts,and recommended maintenance procedures and <br />intervals. <br />1.Include contact information for entity that will be providing contract maintenance and trouble <br />call-back service. <br />P.Executed Warranty: Submit documentation of final executed warranty completed in Owner's name <br />and registered with manufacturer. <br />Q.Maintenance contracts. <br />R.Project Record Documents: Record actual locations of system components,installed circuiting <br />arrangements and routing,and final equipment settings. <br />S.Maintenance Materials: Furnish the following for Owner's use in maintenance of project. <br />1.Extra Fuses: One of each type and size. <br />2.Extra Filter Elements: One of each type,including fuel,oil and air. <br />3.Extra generator enclosure keys:Two of each type required. <br />1.05 QUALITY ASSURANCE <br />A.Comply with the following: <br />1.NFPA 70 (National Electrical Code). <br />2.NFPA 110 (Standard for Emergency and Standby Power Systems);meet requirements for <br />Level 1 system. <br />3.NFPA 37 (Standard for the Installation and Use of Stationary Combustion Engines and Gas <br />Turbines). <br />4.NFPA 30 (Flammable and Combustible Liquids Code). <br />B.Maintain at the project site a copy of each referenced document that prescribes execution <br />requirements. <br />C.Manufacturer Qualifications: Company specializing in manufacturing the products specified in this <br />section with minimum three years documented experience. <br />1.Authorized service facilities located within 200 miles of project site. <br />D.Installer Qualifications: Company specializing in performing the work of this section with minimum <br />three years documented experience with engine generator systems of similar size,type,and <br />complexity;manufacturer's authorized installer. <br />E.Maintenance Contractor Qualifications: Same entity as installer or different entity with specified <br />qualifications. <br />Docusign Envelope ID: DEDB83DA-7916-8AE5-81B0-AA1EA4D56AE9