Orange County NC Website
Browse       Search
22 <br /> 1751 around the top to cover the extra space. Dimensions are critical to ensure the container 0.00 <br /> 1752 will drop into the space provided. 0.00 <br /> 1753 <br /> 1754 SEATING/UPHOLSTERY: OPTIONS <br /> 1755 <br /> 1756 Padded vinyl head protectors over module entryways, color coordinated to match interior <br /> 1762 ( 1 ) *Maroon color for upholstery (Ruby) N/C <br /> 1768 ( 1 ) Net at head of Squad Bench, standard 58"x 17" (Red unless specified in Customer Notes) N/C <br /> 1784 <br /> 1785 FLOOR COVERING: OPTIONS <br /> 1786 <br /> 1787 Heavy duty vinyl floor covering will be installed inside patient compartment <br /> 1788 ( 1 ) * Lonseal/Lonplate II flooring (this flooring will extend up the side walls) <br /> 1797 Type of floor selected above: Floor color Curbside wall covered in: Streetside wall covered in: <br /> 1798 * Lonseal/Lon late II flooring 421 Mica Floor covering Floor covering <br /> 1807 <br /> 1808 HANDRAILS/MOUNTING BRACKETS: OPTIONS <br /> 1809 <br /> 1810 ( 1 ) All handrails will be stainless steel, knurled, antimicrobial rails painted (powder coated)yellow. N/C <br /> 1823 <br /> 1824 Wholesale Extended <br /> 1825 COT / LITTER MOUNT: OPTIONS Price Price <br /> 1826 (Brand) (Model) <br /> 1827 The cot used in this unit will be a: Stryker PowerPro <br /> 1828 The cot will be supplied by: Customer <br /> 1829 The retention system will be supplied by: Customer <br /> 1830 Purchaser Customer agrees to idemnify and hold Excellance harmless for the installation of any <br /> 1831 cot retention system specified by the Customer that is not compliant with any governmental authority. <br /> 1832 <br /> 1833 The mounting position for the cot shall be: <br /> 1834 ( 1 ) *Center mount for one cot N/C <br /> 1836 <br /> 1838 ( 1 ) Post and wheel cups will NOT be installed in the patient compartment. <br /> 1844 <br /> 1845 THE COT WILL BE SUPPLIED BY CUSTOMER <br /> 1849 THE RETENTION SYSTEM WILL BE SUPPLIED BY CUSTOMER <br /> 1850 **A customer-supplied Stryker PowerLoad cot loading system without mass 0.00 <br /> 1851 casualty feature will be installed. 0.00 <br /> 1867 <br /> 1868 MODULE ELECTRICAL SYSTEM: STANDARD SPECIFICATIONS N/C <br /> 1869 <br /> 1870 12 VDC electrical distribution system <br /> 1871 Color and function coded wiring <br /> 1872 GXL high temperature wiring insulation <br /> 1873 Automatic reset circuit breakers <br /> 1874 Heat shrink tubing on all terminals <br /> 1875 Lighted rocker switches <br /> 1876 Engraved backlit switch labels <br /> 1877 1 labeled power distribution panel will be located in the exterior L3/1 compartment <br /> 1878 ( 1 ) * Delete floor-to-ceiling compartment in front bulkhead behind attendant's seat (418.40) (418.40) <br /> 1879 Patient compartment control console with hinged access panels in action area <br /> 1880 12 VDC Medical outlets to be installed as follows: <br /> 1883 Type of outlet: Quantity Location for outlet(s): <br /> 1884 Cigarette 2 EMT Panel-work off module power&shoreline 0.00 <br /> 1889 <br /> 1890 Magnetically controlled, hermetically sealed door switches <br /> 1891 "Module Entry Door Open"warning circuit w/warning light in cab console <br /> 1892 ( 1 ) *Personnel"door open"buzzer on cab console to be activated when in gear. 143.60 143.60 <br /> 1895 Door activated exterior compartment lighting <br /> 1896 All of the dome lights located on the curbside to turn on to low intensity when <br /> 1897 module entry doors are opened and/or switch on cab console is activated <br /> 1898 All switches, indicators and control devices shall be labeled in accordance w/current KKK-A-1822 <br /> 1899 <br /> AQ Version 23.2 <br /> Page 10 of 16 4/6/2026 11:58 AM <br />