Orange County NC Website
Browse       Search
<br />Attendant Booth Additions 01 45 00 - 1 <br />Orange County, North Carolina AUGUST 2025 <br />TRC PN: 670493 <br />PART 1 GENERAL <br />1.01 REQUIREMENTS INCLUDED <br />A. General quality assurance and control <br />B. References <br />C. Manufacturer's instructions, certificates, field services, and reports <br />D. Testing laboratory services <br />1.02 RELATED REQUIREMENTS <br />A. Section 01 33 00 Submittal Procedures <br />1.03 GENERAL QUALITY CONTROL <br />A. Maintain quality control over suppliers, manufacturers, products, services, <br />site conditions, and workmanship, to produce work of specified quality. <br />B. Comply with industry standards except when more restrictive tolerances or <br />specified requirements indicate more rigid standards or more precise <br />workmanship. <br />C. Perform work by persons qualified to produce workmanship of specified <br />quality. <br />D. Secure products in place with positive anchorage devices and sized to <br />withstand stresses, vibration, physical distortion, and disfigurement. <br />1.04 REFERENCES <br />A. Conform to the referenced standards and Standard Specifications. <br />B. Specific provisions of codes, regulations and standards may be <br />referenced in individual Specifications to assist the Contractor and identify <br />options selected by the Engineer. Such references do not relieve the <br />Contractor from compliance with other applicable provisions of codes, <br />regulations, and standards not specifically referenced. <br />C. Should specified reference standards conflict with Contract Documents, <br />request clarification from Engineer before proceeding. <br />1.05 MANUFACTURER’S INSTRUCTIONS AND CERTIFICATES <br />A. Comply with manufacturer's instructions in full detail, including each step <br />in sequence. Should instructions conflict with Contract Documents, <br />request clarification from Engineer before proceeding. <br />B. When required by individual Specifications Section, submit manufacturer's <br />certificate that products meet or exceed specified requirements. <br />SECTION 01 45 00 - QUALITY CONTROL <br />Docusign Envelope ID: 34F94CE0-2CE8-49C5-B7C4-6B696F8E23C3