Orange County NC Website
Browse       Search
REMOUNT PRICING <br />Version 23.0 <br />1774 1 Cab Console Options <br />1775 1 Console Type <br />1776 ( 1 ) <br />Replace floor console - Type 1 - includes spotlight, switches, meter (volt and amp), map light, indicator lights. DOES <br />NOT INCLUDE NEW SIREN OR MAP BOOK STORAGE.1,838.05 1,838.05 <br />1778 (1 )Map / Binder case mounted on floor in cab. 955.25 955.25 <br />1779 1 Enter the number of spaces up to 3 for map storage: <br />1780 1 Enter the amount in inches up to 2" between each storage space: <br />1781 1 <br />1782 (1 )Install 2 cup holders in the front cab console NOTE: This option is available on new consoles 68.26 68.26 <br />1784 1 <br />1826 1 CUSTOMER NOTES AND SPECIAL REQUESTS <br />1827 1 ** Delete the standard map light on the front cab console.-101.51 <br />1828 1 <br />1829 1 ** Install a new personnel "Door Open" buzzer on the cab console to be activated when in gear.209.20 <br />1830 1 <br />1831 1 <br />** Install a Mermaid Dual Temp unit #MKDUAL TEMP in the ALS compartment. The (2) control panels will be installed <br />on the interior R4 cabinet wall in the bulkhead area. Ensure the heating and cooling features of the Mermaid unit <br />function properly.7,458.00 <br />1832 1 <br />1833 1 ** Cabinet modification to install the Mermaid Dual Temp unit into the ALS (H2 cabinet). 1,959.00 <br />1834 1 <br />1870 1 <br />** The existing docking station pole on the console will not be reinstalled. Install Gamber Johnson iPad mounting <br />system on the passenger's side of the cab console. (1) Universal Vertical Base #DS-138; (1) 7" Center-Mounted <br />Complete Upper Pole #7160-0178; (1) Tall Tablet Display Mount #7160-0529; and (1) Notepad Touch Universal Tablet <br />Cradle #7160-1299-00.1,543.50 <br />1871 1 <br />1872 1 <br />**Install (2) customer-supplied radios and tranceiver. One radio will be installed in the cab console & a speaker on the <br />back wall of the cab above the pass-thru window and one radio will be installed in the action area along with one <br />speaker. The radios are to be wired for operating condition. Install an extruded aluminum cover around the transceiver <br />in the L3/2 compartment to protect it from damage. The new radio system will come with new antennas. Do not <br />transfer old antennas. 3,319.50 <br />1873 1 <br />1874 1 <br />** Permanently remove the existing Stealth Power components from the L3/2 compartment. Do Not transfer the <br />existing Stealth power button to the new console or any other components in the unit related to the Stealth system.1,035.75 <br />1875 1 <br />1876 1 ** Remove the (8) LED dome light lenses and clean the inside of the lenses and re-install.378.50 <br />1877 1 <br />1985 1 CUSTOMER NOTES AND SPECIAL REQUESTS <br />1986 1 <br />** Install a customer-supplied Sierra Wireless Gateway system wiring harness and antenna. The wires shall terminate <br />behind the passenger's seat in the cab. The power cable is a gray three-wire cable. The black wire is ground with the <br />red being 12 volt battery power and the white is ignition/accessory, which should have 12V when the truck is running. It <br />should terminate alongside the antenna cables. Both should have at least 18" of slack. The antenna will be installed on <br />the cab roof.1,494.05 <br />1987 1 <br />1988 1 ** The (3) existing Trucklite LED lights in the center trough will remain.0.00 <br />4" <br />(3) w/two Adj. Dividers <br />Rev: 5/18/23 Page 12 of 16 9/17/2024 8:07 AM <br />Docusign Envelope ID: EF1EEE70-841D-4BBC-A429-CADADA6E1ED9