Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 17 <br />a. American Floor Products Co., Inc. <br />b. Construction Specialties, Inc. <br />c. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />d. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />e. Pawling Corporation. <br />3. Shape: [L] [U]. <br />4. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />5. Mounting: [Adhesive] [Countersunk screws through factory-drilled mounting holes] [Double-faced <br />adhesive foam tape]. <br />J. Door-Frame Protector <Insert drawing designation>: Fabricated from extruded rigid plastic, minimum [0.040-inch] <br />[0.050-inch] [0.060-inch] wall thickness; formed to fit entire door-frame profile. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. Construction Specialties, Inc. <br />c. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />d. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />e. Pawling Corporation. <br />3. Height: [36 inches] [48 inches]. <br />4. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />5. Mounting: [Adhesive] [Countersunk screws through factory-drilled mounting holes] [Double-faced <br />adhesive foam tape]. <br />K. Door-Frame Protector <Insert drawing designation>: Assembly consisting of snap-on plastic cover installed over <br />continuous retainer; formed to fit door frame on opposite side of door swing. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. Construction Specialties, Inc. <br />b. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />c. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />d. Pawling Corporation. <br />3. Cover: Extruded rigid plastic, minimum 0.080-inch wall thickness; in dimensions and profiles indicated. <br />a. Height: [36 inches] [48 inches]. <br />b. Corner Radius: [1/4 inch] [1-1/4 inches]. <br />c. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />4. Retainer: Minimum 0.080-inch- thick, 1-piece, extruded aluminum. <br />L. Door-[Knob][Lever] Protector <Insert drawing designation>: Fabricated from injection-molded plastic, minimum <br />0.060-inch wall thickness. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1