Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 15 <br />3. Size: [48 by 96 inches for sheet] [48 by 120 inches for roll] [As indicated]. <br />4. Sheet Thickness: [0.022 inch] [0.028 inch] [0.040 inch] [0.060 inch] [0.080 inch] [0.093 inch] [0.125 inch]. <br />5. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />6. Height: [Full wall] [Wainscot] [As indicated]. <br />7. Trim and Joint Moldings: Extruded rigid plastic that matches sheet wall covering color. <br />8. Mounting: Adhesive. <br />B. Prelaminated, Impact-Resistant Wall Panels <Insert drawing designation>: Rigid wall panels consisting of plastic <br />sheet wall covering material factory laminated to high-impact-resistant core, with moisture-resistant vapor barrier <br />factory laminated to reverse side of panel for stability. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. Construction Specialties, Inc. <br />3. Composition: [0.022-inch- thick plastic sheet laminated to 3/8-inch- thick fiberboard] [0.028-inch- thick <br />plastic sheet laminated to 3/8-inch- thick, fire-retardant-treated particleboard] [0.028-inch- thick plastic <br />sheet laminated to 3/8-inch- thick, oriented strand board] core. <br />4. Sheet Size: [48 by 96 inches] [48 by 108 inches] [48 by 120 inches] [As indicated]. <br />5. Height: [Full wall] [Wainscot] [As indicated]. <br />6. Trim and Joint Moldings: Extruded rigid plastic that matches sheet wall covering color. <br />7. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />8. Mounting: Adhesive. <br />2.9 DOOR-PROTECTION SYSTEMS <br />A. General: Comply with BHMA A156.6. <br />1. For fire-rated doors, provide door-protection systems that are UL listed and labeled. <br />B. Protection Plates: Fabricated from extruded rigid plastic, of thickness indicated. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. Construction Specialties, Inc. <br />c. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />d. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />e. Pawling Corporation. <br />f. Tepromark International, Inc. <br />C. Full-Height Door-Surface Protection <Insert drawing designation>: Minimum [0.040-inch] [0.060-inch] [0.080- <br />inch] wall thickness; with 90-degree bend for door-edge protection. <br />1. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1