Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 14 <br />3. Fire Rating: [1 hour] [2 hours] [Same rating as wall in which end guard is installed]; UL listed and <br />labeled according to UL 2079. <br />4. Cover: Extruded rigid plastic, minimum [0.078-inch] [0.100-inch] wall thickness; [as follows:] [in <br />dimensions and profiles indicated on Drawings.] <br />a. Leg: Nominal [2 inches] [3 inches]. <br />b. Corner Radius: [1/4 inch] [1-1/4 inches]. <br />c. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />5. Retainer: Minimum 0.070-inch- thick, 1-piece, extruded aluminum. <br />6. Aluminum Cove Base: Nominal [4 inches] [6 inches] high. <br />D. Surface-Mounted, Metal, End-Wall Guards <Insert drawing designation>: Fabricated from one-piece, formed or <br />extruded metal that covers entire end of wall; with formed edges. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />3. Material: Stainless steel, Type [304] [430]. <br />a. Thickness: Minimum [0.0500 inch] [0.0625 inch] [0.0781 inch]. <br />b. Finish: [Directional satin, No. 4] [Bright annealed]. <br />4. Material: Extruded aluminum, minimum 0.0625 inch thick, with clear anodic finish. <br />5. Material: Brass sheet, minimum 0.0500 inch thick, with [buffed, smooth specular] [fine satin] finish. <br />6. Wing Size: Nominal [1-1/2 by 1-1/2 inches] [2-1/2 by 2-1/2 inches] [3-1/2 by 3-1/2 inches] <Insert size>. <br />7. Corner Radius: [1/8 inch] [3/4 inch]. <br />8. Mounting: [Flat-head, countersunk screws through factory-drilled mounting holes] [Oval head, <br />countersunk screws through factory-drilled mounting holes] [Double-faced, adhesive foam tape] <br />[Adhesive]. <br />2.8 IMPACT-RESISTANT WALL COVERINGS <br />A. Semirigid, Impact-Resistant Sheet Wall Covering <Insert drawing designation>: Fabricated from plastic sheet wall <br />covering material. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Balco, Inc. <br />d. Construction Specialties, Inc. <br />e. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />f. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />g. Pawling Corporation. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1