Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 11 <br />e. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />f. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />g. Pawling Corporation. <br />3. Fire Rating: [1 hour] [2 hours] [Same rating as wall in which corner guard is installed]; UL listed and <br />labeled according to UL 2079. <br />4. Cover: Extruded rigid plastic, minimum [0.078-inch] [0.100-inch] wall thickness; [as follows:] [in <br />dimensions and profiles indicated on Drawings.] <br />a. Leg: Nominal [2 inches] [3 inches]. <br />b. Corner Radius: [1/4 inch] [1-1/4 inches]. <br />c. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />5. Retainer: Minimum 0.070-inch- thick, 1-piece, extruded aluminum. <br />6. Aluminum Cove Base: Nominal [4 inches] [6 inches] high. <br />D. Surface-Mounted, Opaque-Plastic Corner Guards <Insert drawing designation>: Fabricated from PVC plastic, <br />acrylic-modified vinyl sheet or opaque polycarbonate sheet; with formed edges; fabricated with 90- or 135-degree turn <br />to match wall condition. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Balco, Inc. <br />d. Boston Retail Products. <br />e. Construction Specialties, Inc. <br />f. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />g. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />h. Pawling Corporation. <br />i. Tepromark International, Inc. <br />3. Wing Size: Nominal [3/4 by 3/4 inch] [1-1/8 by 1-1/8 inches] [2-1/2 by 2-1/2 inches]. <br />4. Mounting: [Countersunk screws through factory-drilled mounting holes] [Adhesive] [Double-faced <br />adhesive foam tape]. <br />5. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />E. Surface-Mounted, Transparent-Plastic Corner Guards <Insert drawing designation>: Fabricated from clear <br />polycarbonate plastic sheet; with formed edges; fabricated with 90- or 135-degree turn to match wall condition. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Balco, Inc. <br />d. Construction Specialties, Inc. <br />e. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />f. Pawling Corporation. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1