Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 10 <br />3. Cover: Extruded rigid plastic, minimum [0.078-inch] [0.100-inch] wall thickness; [as follows:] [in <br />dimensions and profiles indicated on Drawings.] <br />a. Profile: Nominal [2-inch- long leg and 1/4-inch] [3-inch- long leg and 1/4-inch] [3-inch- long leg <br />and 1-1/4-inch] corner radius. <br />b. Height: [4 feet] [8 feet]. <br />c. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />4. Retainer: Minimum 0.060-inch- thick, 1-piece, extruded aluminum. <br />5. Top and Bottom Caps: Prefabricated, injection-molded plastic; color matching cover; field adjustable for <br />close alignment with snap-on cover. <br />B. Flush-Mounted, Resilient, Plastic Corner Guards <Insert drawing designation>: Assembly consisting of snap-on <br />plastic cover that is flush with adjacent wall surface, installed over continuous retainer; including mounting hardware; <br />fabricated with 90- or 135-degree turn to match wall condition; full wall height. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Balco, Inc. <br />d. Construction Specialties, Inc. <br />e. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />f. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />g. Pawling Corporation. <br />3. Cover: Extruded rigid plastic, minimum [0.078-inch] [0.100-inch] wall thickness; [as follows:] [in <br />dimensions and profiles indicated on Drawings.] <br />a. Profile: Nominal [2-inch- long leg and 1/4-inch] [3-inch-0 long leg and 1/4-inch] [3-inch- long leg <br />and 1-1/4-inch] corner radius. <br />b. Height: [4 feet] [8 feet]. <br />c. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />4. Retainer: Minimum 0.060-inch- thick, 1-piece, extruded aluminum. <br />5. Aluminum Cove Base: Nominal [4 inches] [6 inches] high. <br />C. Fire-Rated, Resilient, Plastic Corner Guards <Insert drawing designation>: Assembly consisting of snap-on plastic <br />cover that is flush with adjacent wall surface, installed over continuous retainer and intumescent fire barrier; including <br />mounting hardware; fabricated with 90- or 135-degree turn to match wall condition; full wall height. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Balco, Inc. <br />d. Construction Specialties, Inc. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1