Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 9 <br />d. Color: [As indicated by manufacturer’s designations] [Match Architect’s samples] [As selected <br />by Architect from manufacturer’s full range]. <br />2.5 BED LOCATORS <br />A. Bed Locators <Insert drawing designation>: Assembly consisting of continuous snap-on plastic cover installed over <br />continuous retainer; with two bed-locator end caps and mounting hardware; cover designed to spring back when hit. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Construction Specialties, Inc. <br />d. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />e. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />f. Pawling Corporation. <br />3. Cover: Extruded rigid plastic, minimum 0.078-inch wall thickness. <br />a. Profile: Large rounded bullnose profile, nominal 4 inches high by 2 inches deep. <br />b. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />4. Retainer: Minimum 0.080-inch- thick, 1-piece, extruded aluminum. <br />a. Mounting Type: [Surface mounted on 1/2-inch- thick cushion spacers] [Extended mounting on <br />injection-molded plastic mounting brackets] [Extended mounting on aluminum mounting <br />brackets]. <br />5. Bed-Locator End Caps: Prefabricated, injection-molded plastic; color matching cover; field adjustable for <br />close alignment with snap-on cover. <br />2.6 CORNER GUARDS <br />A. Surface-Mounted, Resilient, Plastic Corner Guards <Insert drawing designation>: Assembly consisting of snap-on <br />plastic cover installed over continuous retainer; including mounting hardware; fabricated with 90- or 135-degree turn <br />to match wall condition. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. American Floor Products Co., Inc. <br />b. ARDEN Architectural Specialties, Inc. <br />c. Balco, Inc. <br />d. Construction Specialties, Inc. <br />e. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />f. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />g. Pawling Corporation. <br />h. Tepromark International, Inc. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1