Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />WALL AND DOOR PROTECTION 10 26 00 - 8 <br />C. Wood Handrail with Bumper <Insert drawing designation>: Assembly consisting of continuous sculpted, solid- <br />wood handrail, with bumper insert installed over continuous recessed retainer. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. ARDEN Architectural Specialties, Inc. <br />b. Construction Specialties, Inc. <br />c. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />d. Korogard Wall Protection Systems; Division of RJF International Corporation. <br />e. Pawling Corporation. <br />3. Wood Handrail: [5-1/2 inches high by 1-1/2 inches deep] with 1-1/2-inch- diameter gripping surface. <br />a. End Caps, Corners, and Mounting Brackets: Solid wood that matches rail. <br />b. Wood Species: [Red oak] [Maple] [Ash] [Beech]. <br />c. Finish: [Clear] [Stained]. <br />d. Color: [As indicated by manufacturer’s designations] [Match Architect’s samples] [As selected <br />by Architect from manufacturer’s full range]. <br />4. Bumper: Extruded [rigid plastic] [flexible vinyl], minimum 0.078-inch wall thickness; [as follows:] [in <br />dimensions and profiles indicated on Drawings.] <br />a. Profile: [Half-round profile, nominal 2 inches high by 1 inch] [Small rounded profile, nominal 1- <br />1/8 inches high by 1-1/8 inches] deep. <br />b. Color and Texture: [As indicated by manufacturer’s designations] [As selected by Architect from <br />manufacturer’s full range]. <br />c. End Caps and Corners: Prefabricated, injection-molded plastic; color matching bumper; field <br />adjustable for close alignment with snap-on bumper. <br />5. Retainer: Minimum 0.0625-inch- thick, 1-piece, extruded aluminum. <br />a. Finish: [Mill] [Brass colored]. <br />6. Accessories: Concealed splices and mounting hardware. <br />D. Solid-Wood Handrail <Insert drawing designation>: Assembly consisting of continuous sculpted, solid-wood <br />handrail. <br />1. Basis-of-Design Product: <Insert manufacturer’s name; product name or designation> or a comparable <br />product by one of the following: <br />2. [Available ]Manufacturers: <br />a. ARDEN Architectural Specialties, Inc. <br />b. Construction Specialties, Inc. <br />c. IPC Door and Wall Protection Systems; Division of InPro Corporation. <br />3. Handrail: [5-1/2 inches high by 1-1/2 inches deep] [As indicated on Drawings] <Insert dimensions> with <br />1-1/2-inch- diameter gripping surface. <br />a. Returns, Corners, and Mounting Brackets: Solid wood that matches rail. <br />b. Wood Species: [Red oak] [Maple] [Ash] [Beech]. <br />c. Finish: [Clear] [Stained]. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1