Orange County NC Website
Browse       Search
DOOR HARDWARE 087100-9 <br />Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />1.Provide mortise locks conforming to ANSI/BHMA A156.13 Series 1000, Grade 1, and UL Listed <br />for 3 hour fire doors. <br />2.Provide locks manufactured from heavy gauge steel, containing components of steel with a zinc <br />dichromate plating for corrosion resistance. <br />3.Provide lock case that is multi-function and field reversible for handing without opening case. <br />Cylinders: Refer to KEYING article, herein. <br />4.Provide locks with standard 2-3/4 inches (70 mm) backset with full 3/4 inch (19 mm) throw <br />stainless steel mechanical anti-friction latchbolt. Provide deadbolt with full 1 inch (25 mm) <br />throw, constructed of stainless steel. <br />5.Provide standard ASA strikes unless extended lip strikes are necessary to protect trim. <br />6.Lever Trim: Solid brass, bronze, or stainless steel, cast or forged in design specified, with wrought <br />roses and external lever spring cages. Provide thru-bolted levers with 2-piece spindles. <br />a.Lever Design: Schlage 17N and 03A (see hardware groups). <br />2.05 CYLINDRICAL LOCKS GRADE 1 <br />A.Manufacturers and Products: <br />1.Scheduled Manufacturer and Product: Corbin-Russwin CL3300 series <br />2.Acceptable Manufacturers and Products: Falcon T series, Schlage ND series. <br />B.Requirements: <br />1.Provide cylindrical locks conforming to ANSI/BHMA A156.2 Series 4000, Grade 1, and UL <br />Listed for 3 hour fire doors. <br />2.Cylinders: Refer to KEYING article, herein. <br />3.Provide locks with standard 2-3/4 inches (70 mm) backset, unless noted otherwise, with 1/2 inch <br />latch throw. Provide proper latch throw for UL listing at pairs. <br />4.Provide locksets with separate anti-rotation thru-bolts, and no exposed screws. <br />5.Provide independently operating levers with two external return spring cassettes mounted under <br />roses to prevent lever sag. <br />6.Provide standard ASA strikes unless extended lip strikes are necessary to protect trim. <br />7.Provide electrified options as scheduled in the hardware sets. <br />8.Lever Trim: Solid cast levers without plastic inserts and wrought roses on both sides. <br />a.Lever Design: Corbin Russwin Princeton (PZD). <br />2.06 ELECTRIC STRIKES <br />A.Manufacturers and Products: <br />1.Scheduled Manufacturer and Product: Von Duprin 6000 Series. <br />2.Acceptable Manufacturers and Products: Folger Adam 300 Series, HES 1006 Series. <br />B.Requirements: <br />1.Provide electric strikes designed for use with type of locks shown at each opening. <br />2.Provide electric strikes UL Listed as burglary-resistant. <br />3.Where required, provide electric strikes UL Listed for fire doors and frames. <br />4.Provide transformers and rectifiers for each strike as required. Verify voltage with <br />electrical contractor. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1