Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />TOPICAL MOISTURE VAPOR MITIGATION SYSTEM 07 26 19 - 1 <br />SECTION 07 26 19 TOPICAL MOISTURE VAPOR MITIGATION SYSTEM <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and <br />Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section Includes: <br />1. One coat, fast-curing, 100% solids epoxy moisture management system formulated to suppress <br />excessive moisture vapor in new or existing concrete prior to the installation of a topping with <br />sealer, or underlayment with flooring. <br />B. Related Sections: <br />1. Division 01 Section "Allowances" for allowance pricing and quantities related to this section. <br />2. Division 01 Section "Unit Prices for unit prices related to this section. <br />3. Division 09 Section "Resilient Base and Accessories" for resilient base, reducer strips, and other <br />accessories installed with resilient floor coverings. <br />1.3 REFERENCES <br />A. ASTM F2170 - Relative Humidity in Concrete Floor Slabs Using In Situ Probes <br />B. ASTM F1869 - Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride <br />C. ASTM F710 - Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring <br />D. ASTM C1583 - Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength <br />or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension <br />E. ASTM E96 - Standard Test Methods for Water Vapor Transmission of Materials <br />F. ASTM D1308 - Chemical Resistance of Finishes <br />G. ASTM F3010 13 Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for <br />Use Under Resilient Floor Coverings. <br />1.4 SUBMITTALS <br />A. Maintenance Data: For each type of floor tile to include in maintenance manuals. <br />B. Test Results: Moisture Vapor Emission Test Data <br />C. Product Data: Submit manufacturer’s product data and installation instructions for each material and <br />product used. Include manufacturer’s Material Safety Data Sheets. <br />D. Qualification Data: For Installer <br />E. Manufacturer Pre-Installation Checklist <br />1.5 QUALITY ASSURANCE <br />A. Installer Qualifications: A qualified installer who employs workers for this Project who are competent in <br />techniques required by manufacturer. <br />1. Installation of the product must be completed by a factory trained applicator using mixing <br />equipment and tools approved by the manufacturer. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1