Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />INTERIOR ARCHITECTURAL WOODWORK 06 40 23 - 3 <br />allowance for trimming at site, and coordinate construction to ensure that actual dimensions <br />correspond to established dimensions. <br />1.8 COORDINATION <br />A. Coordinate sizes and locations of framing, blocking, furring, reinforcements, and other related units of <br />Work specified in other Sections to ensure that interior architectural woodwork can be supported and <br />installed as indicated. <br />PART 2 - PRODUCTS <br />2.1 MATERIALS <br />A. General: Provide materials that comply with requirements of AWS’s quality standard for each type of <br />woodwork and quality grade specified, unless otherwise indicated. <br />B. Wood Species and Cut for Transparent Finish: Clear Hard Maple. <br />C. Wood Species for Opaque Finish: Eastern white pine, sugar pine, or western white pine. <br />D. Wood Products: Comply with the following: <br />1. Hardboard: AHA A135.4. <br />2. Medium-Density Fiberboard: ANSI A208.2, Grade MD, made with binder containing no urea <br />formaldehyde. <br />3. Particleboard: ANSI A208.1, Grade M-2. <br />4. Softwood Plywood: DOC PS 1, Medium Density Overlay. <br />5. Veneer-Faced Panel Products (Hardwood Plywood): HPVA HP-1. <br />E. Thermoset Decorative Panels: Particleboard or medium-density fiberboard finished with thermally fused, <br />melamine-impregnated decorative paper complying with LMA SAT-1. <br />1. Provide PVC or polyester edge banding complying with LMA EDG-1 on components with exposed <br />or semiexposed edges. <br />F. High-Pressure Decorative Laminate: NEMA LD 3, grades as indicated or, if not indicated, as required by <br />woodwork quality standard. <br />1. Manufacturer: Subject to compliance with requirements, provide high-pressure decorative <br />laminates by one of the following: <br />a. Abet Laminati, Inc. <br />b. Arborite; Division of ITW Canada, Inc. <br />c. Formica Corporation. <br />d. Lamin-Art, Inc. <br />e. Nevamar Company, LLC; Decorative Products Div. <br />f. Panolam Industries International Incorporated. <br />g. Westinghouse Electric Corp.; Specialty Products Div. <br />h. Wilsonart International; Div. of Premark International, Inc. <br />G. Solid-Surfacing Material: Homogeneous solid sheets of filled plastic resin complying with ISSFA-2. <br />1. Manufacturers: Subject to compliance with requirements, provide products by one of the following: <br />a. ABA Industries. <br />b. Avonite, Inc. <br />c. Corian <br />d. E. I. du Pont de Nemours and Company. <br />e. Formica Corporation. <br />f. Hanex <br />g. LG Chemical, Ltd. <br />h. Meganite Inc.; a division of the Pyrochem Group. <br />i. Nevamar Company, LLC; Decorative Products Div. <br />j. Samsung; Cheil Industries Inc. <br />k. Swan Corporation (The). <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1