Orange County NC Website
Browse       Search
Orange County Health Department Improvements Smith Sinnett / 2024008 <br />Hillsborough, NC Orange County Asset Management Services <br />SUBMITTAL PROCEDURES 01 33 00 - 6 <br />F. Installer Certificates: Prepare written statements on manufacturer’s letterhead certifying that Installer <br />complies with requirements in the Contract Documents and, where required, is authorized by <br />manufacturer for this specific Project. <br />G. Manufacturer Certificates: Prepare written statements on manufacturer’s letterhead certifying that <br />manufacturer complies with requirements in the Contract Documents. Include evidence of manufacturing <br />experience where required. <br />H. Product Certificates: Prepare written statements on manufacturer’s letterhead certifying that product <br />complies with requirements in the Contract Documents. <br />I. Material Certificates: Prepare written statements on manufacturer’s letterhead certifying that material <br />complies with requirements in the Contract Documents. <br />J. Material Test Reports: Prepare reports written by a qualified testing agency, on testing agency’s standard <br />form, indicating and interpreting test results of material for compliance with requirements in the Contract <br />Documents. <br />K. Product Test Reports: Prepare written reports indicating current product produced by manufacturer <br />complies with requirements in the Contract Documents. Base reports on evaluation of tests performed by <br />manufacturer and witnessed by a qualified testing agency, or on comprehensive tests performed by a <br />qualified testing agency. <br />L. Research/Evaluation Reports: Prepare written evidence, from a model code organization acceptable to <br />authorities having jurisdiction, that product complies with building code in effect for Project. Include the <br />following information: <br />1. Name of evaluation organization. <br />2. Date of evaluation. <br />3. Time period when report is in effect. <br />4. Product and manufacturers’ names. <br />5. Description of product. <br />6. Test procedures and results. <br />7. Limitations of use. <br />M. Schedule of Tests and Inspections: Comply with requirements specified in Division 01 Section "Quality <br />Requirements." <br />N. Preconstruction Test Reports: Prepare reports written by a qualified testing agency, on testing agency’s <br />standard form, indicating and interpreting results of tests performed before installation of product, for <br />compliance with performance requirements in the Contract Documents. <br />O. Compatibility Test Reports: Prepare reports written by a qualified testing agency, on testing agency’s <br />standard form, indicating and interpreting results of compatibility tests performed before installation of <br />product. Include written recommendations for primers and substrate preparation needed for adhesion. <br />P. Field Test Reports: Prepare reports written by a qualified testing agency, on testing agency’s standard <br />form, indicating and interpreting results of field tests performed either during installation of product or <br />after product is installed in its final location, for compliance with requirements in the Contract <br />Documents. <br />Q. Maintenance Data: Prepare written and graphic instructions and procedures for operation and normal <br />maintenance of products and equipment. Comply with requirements specified in Division 01 Section <br />"Operation and Maintenance Data." <br />R. Design Data: Prepare written and graphic information, including, but not limited to, performance and <br />design criteria, list of applicable codes and regulations, and calculations. Include list of assumptions and <br />other performance and design criteria and a summary of loads. Include load diagrams if applicable. <br />Provide name and version of software, if any, used for calculations. Include page numbers. <br />S. Manufacturer’s Instructions: Prepare written or published information that documents manufacturer’s <br />recommendations, guidelines, and procedures for installing or operating a product or equipment. Include <br />name of product and name, address, and telephone number of manufacturer. Include the following, as <br />applicable: <br />1. Preparation of substrates. <br />2. Required substrate tolerances. <br />3. Sequence of installation or erection. <br />4. Required installation tolerances. <br />5. Required adjustments. <br />6. Recommendations for cleaning and protection. <br />Docusign Envelope ID: 186E0FF8-664C-4A5C-9F97-28196CE69FD1