2025-207-E-AMS-Gilban crisis diversion-Master WC GL AutoXS-10M

Browse Search

Page 20 of 53 5-2-25 20.2. The CMAR shall provide and maintain suitable all-weather access to the construction site and all buildings. 20.3. Before final inspection and acceptance of the building, the CMAR shall ensure that all portions of the Work are clean, including glass, hardware, fixtures, masonry, tile and marble (using no acid). The CMAR shall clean and wax all floors as specified, and completely prepare the building for use by the Owner, with no cleaning required by the Owner. 21. PROTECTION OF WORK, PROPERTY AND THE PUBLIC 21.1. The CMAR shall be responsible for the entire site and the building or construction of the same and provide all the necessary protections, as required by the Owner’s Representative or Project Designer, and by laws or ordinances governing such conditions. Consistent with the indemnification provisions elsewhere in this Contract, and subject to the benefits of any Owner- controlled or Owner-provided insurance that covers the interests of the CMAR and its Subcontractors, the CMAR shall be responsible for protecting the public and those on the site against all bodily injury or harm, and protecting against any damage to the Work, to adjacent property, and to property of others. The CMAR shall have access to the Project at all times. Subject to its ultimate contractual responsibility for protection of work, property and the public under this Contract, and subject to any non-delegable duties imposed by law, the CMAR may delegate to Subcontractors these obligations of the CMAR under this Contract, and may obtain indemnification and insurance from Subcontractors as the CMAR deems reasonable and prudent. 21.2. The CMAR shall provide cover and protect all portions of the structure when the Work is not in progress, provide and set all temporary roofs, covers for doorways, sash and windows, and all other materials necessary to protect all the Work on the building, whether set by it, or any of the Subcontractors. 21.3. Any Work damaged through the lack of proper protection or from any other cause, shall be repaired or replaced. 21.4. No fires of any kind will be allowed inside or around the operations during the course of construction without special permission from the Owner’s Representative. 21.5. The CMAR shall protect all trees and shrubs designated to remain in the vicinity of the operations by building substantial boxes around same. The CMAR shall barricade all walks, roads, etc., as directed by the Project Designer to keep the public away from the construction. All trenches, excavations or other hazards in the vicinity of the Work shall be well barricaded and properly lighted at night. 21.6. The CMAR shall develop and implement a Project safety program in accordance with the RFQ and applicable regulations. The Owner will have final approval of the CMAR's Safety Program. The Owner’s Representative may require additional safety measures before granting approval. Subcontractors must also comply with any such additional safety requirements of the OCIP program. The CMAR shall report, to the Owner, as part of each monthly report, any safety violations and actions taken to protect the safety of persons and property engaged in the Project. The CMAR may require that all Subcontractors meet the CMAR’s safety program requirements including where those requirements meet or exceed State or Federal requirements. 21.7. The CMAR shall be responsible for all necessary safety measures for the protection of all persons on the job, including the requirements of the Associated General Contractors of America Accident Prevention Manual in Construction, as amended, and shall fully comply with all state, federal, and local laws or regulations and North Carolina State Building Code requirements to prevent accident or injury to persons on or about the location of the Work. The CMAR shall clearly Docusign Envelope ID: 5A9E3BC2-EAE1-4C35-82D9-B4D6A375FA78