Orange County NC Website
Browse       Search
Orange County Solid Waste <br />Scalehouse Building 00 62 33 -1 ROOF MANUFACTURER'S <br />ACKNOWLEDGMENT <br />SECTION 00 62 33 <br />ROOF MANUFACTURER'S ACKNOWLEDGMENT <br />PART 1 GENERAL <br />1.1 FROM: <br />A.Roofing ​​Contractor​​:_____________________________________________________ <br />B.Address:______________________________________________________________ <br />C.Phone:________________________Email:_________________________________ <br />1.2 FOR: <br />A.Owner:Orange County <br />B.Project:​​Orange County Solid Waste Scalehouse Building​​ <br />C.REI Project No.:​10898​ <br />D.Address:​​​​​1207 Eubanks Road,​​​​​ Chapel Hill,​​​​​North Carolina​​​​​ ​​​27516​​​​ <br />1.3 ACKNOWLEGEMENT <br />A.This is to advise the Owner that having thoroughly reviewed the Specifications and <br />Drawings contained within the Project Manual dated ​​01-03-2025​​,the above-titled project, <br />we acknowledge that the roof system(s)and flashing system(s)specified are suitable for <br />the issuance of the specified Manufacturer's warranty on this project and have been <br />tested and approved for the wind uplift pressures and specified external fire resistance <br />rating outlined in the project specifications. Having reviewed the project requirements in <br />detail,the Manufacturer will provide a written response of exceptions or exclusions to the <br />Engineer through the contractor as otherwise outlined in the Advertisement or Invitation <br />for Bids,if conflicts exist between the Manufacturer's warranty requirements and the <br />above listed documents. Exceptions not submitted accordingly are subject to rejection. <br /> The manufacturer also certifies that the installer is approved,authorized,or licensed by <br />the manufacturer to install the specified roof system and is eligible to provide the <br />specified manufacturer's warranty. The manufacturer will comply with the specified <br />requirements for on-site technical support. <br />1.4 EXECUTED BY: <br />A.Manufacturer's Company Name:____________________________________________ <br />B.Designated Reviewer Name and Title:________________________________________ <br />C.Signature:____________________________________Date:____________________ <br />END OF SECTION <br />Docusign Envelope ID: FA2D0569-6BCE-4E38-B3EE-9B3EFD09A753