Orange County NC Website
Browse       Search
OC Sportsplex Pool HVAC Unit Replacement <br />PDC Project 23022 Conduit for Electrical Systems 26 05 33.13 - 3 <br />G.Unfinished spaces subject to damage (Electrical,Mechanical etc.) <br />1.All conduit in unfinished spaces shall rigid galvanized steel.Conduit is not considered subject <br />to damage when installed at least 10 feet above finished floor or tight to structure. <br />2.Conduits are not required to transition to transition to rigid galvanized steel where they are <br />routed down into panelboards or other wall mounted equipment. <br />H.Exposed,Interior finished spaces: Use surface metal raceway as identified on the drawings. <br />1.Surface metal raceway shall be manufactured by Wiremold or approved equal. <br />2.A separate equipment ground conductor shall be run in the surface metal raceway. <br />I.Connection to vibrating equipment shall be made with flexible metal conduit or liquid tight flexible <br />metal conduit depending on the environment installed. <br />J.Connections to Vibrating Equipment: <br />1.Dry Locations: Use flexible metal conduit. <br />2.Damp,Wet,or Corrosive Locations: Use liquidtight flexible metal conduit. <br />3.Maximum Length: 6 feet unless otherwise indicated. <br />4.Vibrating equipment includes,but is not limited to: <br />a.Motors. <br />5.02 CONDUIT REQUIREMENTS <br />A.Existing Work: Where existing conduits are indicated to be reused,they may be reused only <br />where they comply with specified requirements,are free from corrosion,and integrity is verified by <br />pulling a mandrel through them. <br />B.Provide all conduit,fittings,supports,and accessories required for a complete raceway system. <br />C.Provide products listed,classified,and labeled as suitable for the purpose intended. <br />D.Minimum Conduit Size,Unless Otherwise Indicated: <br />1.Interior: 3/4 inch (21 mm)trade size. <br />2.Flexible Connections to Luminaires: ​1/2 inch (13 mm)​trade size. <br />3.Exterior: 1 inch (27 mm)trade size. <br />5.03 GALVANIZED STEEL RIGID METAL CONDUIT (RMC) <br />A.Manufacturers: <br />1.Allied Tube &Conduit. <br />2.Republic Conduit. <br />3.Wheatland Tube Company. <br />4.or approved equal. <br />B.Description: NFPA 70,Type RMC standard weight mild steel,hot dipped galvanized,sherardised <br />or zinc-coated rigid metal conduit complying with ANSI C80.1 and listed and labeled as complying <br />with UL 6. <br />C.Fittings: <br />1.Manufacturers: <br />a.Thomas &Betts Corporation. <br />b.Rayco. <br />c.Appleton. <br />d.or approved equal. <br />2.Connectors and Couplings: Use steel compression fittings with insulated throats. <br />5.04 INTERMEDIATE METAL CONDUIT (IMC) <br />A.Description: NFPA 70,Type IMC galvanized steel intermediate metal conduit complying with ANSI <br />C80.6 and listed and labeled as complying with UL 1242. <br />B.Fittings: <br />1.Non-Hazardous Locations: Use fittings complying with NEMA FB 1 and listed and labeled as <br />complying with UL 514B. <br />2.Material: Use steel or malleable iron. <br />Docusign Envelope ID: D4F3B98E-0756-4A0C-A3AD-05AA32D39F1C