2025-127-E-AMS-Comfort Systems USA (Mid Atlantic) LLC-Sportsplex Pool HVAC Unit Replacement

Browse Search

OC Sportsplex Pool HVAC Unit Replacement PDC Project 23022 HVAC GENERAL PROVISIONS 23 01 00 - 3 E.Contractor shall clearly indicate deviations (if any)from the project specifications on each submittal.Shop drawings accepted by the Engineer shall not relieve the Contractor of their responsibility to construct the work in accordance with the Contract Documents. F.Include proper identification of equipment or item by name and/or number,as indicated on the Drawings. G.Where manufacturer's reference numbers differ from those specified,clearly indicate such on the submittal. H.Where equipment or items specified include accessories,parts,and additional items under one designation,submittals shall be complete and include all required components. I.Equipment requiring electrical connections shall include composite wiring diagrams,motor efficiency,and power factor data.Wiring diagrams submitted shall be specific to project conditions. J.Where submittals cover products containing non-metallic materials,include MSDS sheets from the manufacturer stating physical and chemical properties of components and precautionary steps to be taken. K.The Contractor shall provide an electronic PDF copy of submittal data. The pdf shall contain complete submittal data on all products,methods,etc.proposed for use on the project. L.Each submittal shall bear the approval of the Contractor indicating that he has reviewed the data and found it to meet the requirements of the specifications as well as space limitations and other project conditions. The submittals shall be clearly identified showing project name,manufacturer's catalog number,and all necessary performance and fabrication data. M.The Contractor shall submit to the Engineer a set of accurately marked up plans indicating all changes encountered during the construction. Final payment will be contingent on receipt of these as-built plans. N.The Contractor shall furnish an electronic PDF copy of maintenance and operating instructions as outlined in Paragraph C (Execution),of this specification section. O.The Contractor shall submit to the Owner all certificates required for operating system in compliance with local,state and federal regulations. 1.06 PRODUCT DELIVERY,STORAGE AND HANDLING A.All material and equipment shall be delivered and unloaded by the Contractor within the project site as noted herein or as directed by the Owner. B.The Contractor shall protect all material and equipment from breakage,theft,or weather damage. No material or equipment shall be stored on the ground. C.The material and equipment shall remain the property of the Contractor until the project has been completed and turned over to the Owner. 1.07 WORK CONDITIONS AND COORDINATION A.The Contractor shall review the electrical plans to establish points of connection and the extent of electrical work to be provided in his Contract. All electrical work shall be performed by a licensed electrical contracting firm. B.This Contractor shall be responsible for the final electrical connections to all equipment installed as part of his contract. C.Electrical work shall be in accordance with all local,state and national codes and as specified in Division 26. D.Where architectural features and elements govern location of work,refer to Architectural drawings prior to fabrication of materials or system components. E.Refer to the Structural Drawings to become familiar with structural member sizes,framing type and configuration,opening sizes,and other details that could impact the work.Failure to coordinate with the Work of other trades,resulting in relocation of installed work to coordinate with architectural and/or structural elements,shall NOT be allowed as a basis for extra compensation by the contractor. Docusign Envelope ID: D4F3B98E-0756-4A0C-A3AD-05AA32D39F1C