|
<br /> 2
<br />
<br />Materials are specific to each job application. A deposit is required prior to the scheduling of each project.
<br />Standard warranty offers a full (1) year warranty on materials and labor from date of purchase according to Terms and Conditions. Warranty will provide
<br />replacement of material and needed labor in the event that TRI Solutions Inc materials prove defective and provided materials are installed in strict compliance by
<br />Certified TRI Solutions Inc installation technicians. Samples are only representative of what will be installed in your project. Improperly cured or prepared sub floor
<br />which is specified in your new construction along with the sub floor being level, structurally sound, free of residual solvent(s), moisture free and fully cured is the
<br />responsibility of the General Contractor, Construction Company or the Project Superintendent. All services guaranteed as specified. All work to be complete in a
<br />workmanlike manner according to standard practices. Any alteration or deviation from this proposal involving extra costs will be executed only upon written orders,
<br />and will become an extra charge over and above the proposal. All agreements contingent upon strikes, accidents or delays beyond our control. Owner to carry fire,
<br />tornado and other necessary insurance. Our workers are fully covered by Workman’s Compensation Insurance. Evidence of Insurance will be provided upon
<br />request. Any special requirements or endorsements may incur additional charges. We do not waive any rights of subjugation against contractor or owner for any
<br />loss covered by insurance of any type. Notwithstanding the foregoing, in no event will TRI Solutions Inc be responsible for damages due to delays beyond TRI
<br />Solutions Inc reasonable control.
<br />TRI Solutions Inc warrants and guarantees that all Materials and equipment furnished shall be new unless otherwise specified, and that all Work will be of the
<br />specified quality, free from faults or defects in Materials or workmanship, and in accordance with requirements.
<br />All TRI Solutions Inc services require a minimum of 72 of cure time before they can be exposed to moisture. If this timeline is not adhered to the customer takes
<br />full responsibility for any damage or performance issues that may result. Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Lack of
<br />ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing
<br />may cause amine blush, possibly affecting adhesion of subsequent topcoats.
<br />TRI Solutions Inc will take all precaution to protect adjoining flooring, walls, materials etcetera from exposure to water and/or chemicals. Any damage that may
<br />occur from contact from water and/or chemical is not the responsibility of TRI Solutions Inc. or its staff.
<br />TRI Solutions Inc marketing will send periodic email communication informing you of various service offerings. At any time you wish to stop receiving this
<br />information you may opt out from within the email received or contact our office.
<br />I hereby give TRI Solutions Inc. authorization to do the work specified and payment will be made as outlined above.
<br />Payment Retainage Terms: If the client, other than as allowed by the external executed contract may withhold retainage for poor performance or unresolved punch
<br />items up to 10% of the stated above total proposal/contract price. Any amount withheld in excess of the 10% will be deemed non payment and result in TRI
<br />Solutions perusing actions including suspension of services, Liens or other legal means to satisfy the outstanding debt. Any disputes arising from the
<br />interpretation or application of this policy will be settled through mediation.
<br />Suspending Services for Non Payment. If the client, other than as allowed by the Contract or other than due to the fault of TRI Solutions Inc, fails to pay TRI
<br />Solutions Inc undisputed amounts due within thirty (30) days after the time that such amounts are due to be paid, TRI Solutions Inc may, upon seven (7) additional
<br />days’ written notice to the client, stop the Work until payment of such undisputed amount is paid. The Contract Time and Contract Sum shall be extended
<br />appropriately to reflect TRI Solutions Inc reasonable costs of shut-down, delay, and start-up.
<br />Standard of Care. It is agreed that TRI Solutions Inc expressly disclaims all express or implied warranties and guarantees with respect to the performance of
<br />professional services, and it is agreed that the quality of such services shall be judged solely as to whether TRI Solutions Inc performed its services consistent with
<br />the professional skill and care ordinarily provided by firms practicing in the same or similar locality under the same or similar circumstances (hereinafter the
<br />“Standard of Care”)
<br />Limitation of Damages. Neither party shall be liable to the other party for lost revenues, lost profits or other incidental, indirect, special, consequential, or exemplary
<br />damages in connection with this Agreement or performance here-under, whether or not a party has been advised by the other party of the probability of such
<br />damage or loss, whether such damage or loss arises in contract, tort, including negligence, strict liability or otherwise. The Contractor, Owner, or End users sole
<br />remedy under this Agreement for any Products, Services, or Labor that fail to conform to the applicable Specifications or otherwise for TRI Solutions breach of this
<br />Agreement shall be the repair or replacement of the Products, Services or a refund of the amount actually paid to TRI Solutions by Contractor, Owner, or End User
<br />for specific Product or Services provided. Claims for damages of any nature whatsoever pursued under this Agreement shall be limited to direct damages only up
<br />to the aggregate amount of contract disbursed as of the time the dispute arises.
<br />Ultra Durable Floors warrants that, for a period of twelve (12) months, after application by Certified Contractor, the Products will (i) conform to industry standards,
<br />(ii) be fit for the purpose for which they were designed; (iii) meet the requirements of all applicable law.
<br />Any statements, representations, warranties, or advertisements made by a Certified Contractor concerning the products shall be its sole responsibility. This
<br />warranty does not include defects or nonconformity to the extent it is caused by misuse, mishandling, misapplication or modification by Certified Contractor.
<br />Warranted products include Epic gloss, Epic satin either with or without Epic Bond Promoter.
<br />Floor surfaces must be clean of any existing finishes, dirt, grease, grime, and any other contaminants. Surfaces must have a neutral ph at the time of application.
<br />Floor must also be completely dry. Moisture readings should be taken before and after the preparation process on porous floors (especially concrete and cement
<br />based terrazzo) to ensure that it is completely dry prior to an Epic application.
<br />Product must be installed within 60 days of the batch date listed on each Part A container. If product is more than 60 days past the batch date, contact your
<br />product supplier for a shelf life additive or to replace the product prior to use.
<br />Product contents must be inspected prior to application. Stir Part A prior to adding part B. Do not use if Part A has any hard settled material on the bottom of the
<br />bucket. Do not use part B if there is any crystallization or film on the surface of the product. Do not mix and use products that have leaked to ensure the ratios of
<br />
<br />Docusign Envelope ID: 92B68706-E79A-4028-AD2D-D6CA78DCB231
|