Orange County NC Website
Browse       Search
Orange County Architectural Renovations Smith Si nnett / 2023036 <br />Hillsborough, NC Orange County Asset Management Services <br /> <br />PAINTING 09 91 00 - 1 <br />SECTION 09 91 00 - PAINTING <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary General <br />Conditions and Division 1 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. This Section includes surface preparation, painting, and finishing of exposed interior and exterior items <br />and surfaces. <br />1. Surface preparation, priming, and finish coats specified in this Section are in addition to shop - <br />priming and surface treatment specified under other Sections. <br />2. Paint exposed surfaces whether or not colors are designated in schedules, except where a surface <br />or material is specifically indicated not to be painted or is to remain natural. Where an item or <br />surface is not specifically mentioned, paint the same as similar adjacent materials or surfaces. If <br />color or finish is not designated, the Architect will select from standard colors or finishes <br />available. <br />a. Painting includes field-painting exposed bare and covered pipes and ducts (including color <br />coding), hangers, exposed steel and iron work, and primed metal surfaces of mechanical <br />and electrical equipment. <br />b. Painting includes all exposed metal excepted as noted by this specification as metal <br />surfaces not to be painted. <br />c. In the event of a conflict between this Section and painting requirements in the Mechanical <br />and Electrical Sections of these specifications, the requirements of this Section shall <br />govern. It is the intention of this specification to ensure that one painting subcontractor <br />will accomplish all exposed painting work in occupied areas of this project. This does not <br />relieve contractors of responsibility for corrective work required by damages to completed <br />or existing work. <br />3. Painting is not required on prefinished items, finished metal surfaces, concealed surfaces, <br />operating parts, and labels. <br />a. Prefinished items not to be painted include the following factory-finished components: <br />1) Acoustical Ceiling Tile <br />2) Plastic toilet enclosures. <br />3) Pre-finished wood doors <br />4) Pre-finished interior architectural woodwork. <br />5) Architectural laminate-clad casework. <br />6) Metal lockers <br />7) Finished mechanical and electrical equipment. <br />8) Light fixtures. <br />9) Switchgear. <br />10) Distribution cabinets. <br />4. Concealed surfaces include walls or ceilings in the following generally inaccessible spaces: <br />a. Foundation spaces. <br />b. Furred areas. <br />c. Ceiling plenums. <br />5. Finished metal surfaces not to be painted include: <br />a. Anodized aluminum. <br />b. Stainless steel. <br />Docusign Envelope ID: 52FACC74-DA96-491B-B0B8-04AC3961737D