Orange County NC Website
Browse       Search
OFFICE102CORRIDOR101OFFICE103OFFICE104OFFICE105OFFICE106OFFICE110TLT.107TLT.109STOR.1083A1-01W1W1W1W1W1W1111111EXISTING3' - 2"3' - 2"W14A1-016A1-015A1-01W1W1W1W1W1W1EXISTING WALL -COMPOSITION UNCONFIRMED(DASHED LINE)PROVIDE NEW FULLY ADHERED AIR BARRIER TRANSITION MEMBRANE TO SEAL ANY GAPS AT HEAD/JAMB/SILL INTERFACE WITH WINDOWNEW ALUMINUM STOREFRONT WINDOW -AS SCHEDULEDEXISTING CHANNEL TRIM 1"EXISTING METAL CLOSURE/FLASHINGEXISTING WALL BEYONDNEW WOOD SPACER & SEALANT ALL SIDES AL. STOREFRONT- SEPARATE DISSIMILAR METALSSILL FLASHING(BELOW). INSPECT REPAIR AND REPLACE AS NEEDEDNEW WINDOW SILL .064 BREAK ALUMINUM CLOSURE PLATE SET IN BED OF SEALANTEXISTING WALL -COMPOSITION UNCONFIRMED(DASHED LINE)PROVIDE NEW FULLY ADHERED AIR BARRIER TRANSITION MEMBRANE TO SEAL ANY GAPS AT HEAD/JAMB/SILL INTERFACE WITH WINDOWNEW ALUMINUM STOREFRONT WINDOW -AS SCHEDULEDEXISTING CHANNEL TRIM EXISTING WALL BEYONDEXISTING METAL PANEL CLADDINGEXISTING CHANNEL TRIM 1"WOOD SPACER & SEALANT ALL SIDES AL. STOREFRONT- SEPARATE DISSIMILAR METALSNEW ALUMINUM STOREFRONT WINDOW AS SCHEDULEDNEW WOOD WINDOW SILLNEW ALUMINUM SILL FLASH (MATCH FRAME FINISH) SET IN BED OF SEALANT. PROVIDE POSITIVE DRAINAGE FROM WINDOW FRAME(DASHED LINE)PROVIDE NEW FULLY ADHERED AIR BARRIER TRANSITION MEMBRANE TO SEAL ANY GAPS AT HEAD/JAMB/SILL INTERFACE WITH WINDOWCAULK EXISTING WALL -COMPOSITION UNCONFIRMED1/2"GENERAL DEMOLITION NOTES:1. ALL CONDITIONS SHALL BE FIELD VERIFIED BY THE CONTRACTOR WHERE DEMOLITION IS TO OCCUR. THE CONTRACTOR SHALL NOTIFY ARCHITECT OF ANY INCONSISTANCIES IN WRITING PRIOR TO STARTING ANY WORK.2. THE CONTRACTOR SHALL BE RESPONSIBLE FOR WEEKLY AND/OR DAILY REMOVAL AND PROPER DISPOSAL OF ALL DEBRIS ACCUMULATED DURING DEMOLITION AND CONSTRUCTION.3. ANY FLOOR, CEILING, WALL OR OTHER MATERIALS INCLUDING FINISHES IN AREAS TO REMAIN ARE THE RESPONSIBILITY OF THE CONTRACTOR TO PROTECT. ANY MATERIALS DAMAGED DURING CONSTRUCTION OR DEMOLITION, SHALL BE RETURNED TO THEIR ORIGINAL STATE, OR IMPROVED AS INDICATED BY THE OWNER OR ARCHITECT, OR REPLACED WITH A NEW MATERIAL TO MATCH ADJACENT MATERIALS, TYPICAL. 4. CONTRACTOR SHALL PATCH AND REPAIR ALL EXISTING SURFACES TO REMAIN AND MATERIALS EXPOSED TO VIEW WHERE OTHER ITEMS OR MATERIALS HAVE BEEN REMOVED.5. THE GENERAL CONTRACTOR SHALL COORDINATE THE DEMOLITION OF THE EXISTING BUILDING AREAS WITH THE ARCHITECT AND OWNER. THE CONTRACTOR SHALL COORDINATE AFTER HOURS WORK AND OBTAIN WRITTEN OWNER PERMISSION FOR NIGHT AND WEEKEND WORK.6. CONTRACTOR SHALL ENSURE WATER-TIGHT INTEGRITY OF THE TEMPORARY ENCLOSURE SYSTEMS AND MAINTAIN THEM THROUGH THE ENTIRETY OF CONSTRUCTION TO PREVENTTHE INTRUSION OF WATER AND THE ELEMENTS INTO THE BUILDING.1REMOVE EXISTING FRAME IN ITS ENTIRETY. PREPARE EXISTING WALL TO RECEIVE A NEWFRAME AND PREPARE SURROUNDING AREA TO RECEIVE NEW FINISH SPECIFIED OR IF NOFINISH IS SPECIFIED MATCH EXISTING. INCLUDE WITHIN DEMOLITION ALL TOOTHING OFCMU WALL NECESSARY TO PREPARE WALL TO RECEIVE NEW FRAME.DEMOLITION KEYNOTES:DRAWN BY:CHECKED BY:DESCRIPTIONDATEIDT 919 781 8582F 919 781 39794600 Lake Boone TrailSuite 205Raleigh, NC 27607info@smithsinnett.comThis drawing and the design shown is the property of Smith Sinnett Architecture, P.A. the reproduction or use of this property without the written consent of the Architect is prohibited. Any infringement of the ownership rights will be subject to legal action. All copies of this drawing must be returned to the Architect at the completion of the contract.Smith Sinnett Architecture, P.A. 2024THIS DRAWING IS FORMATTED TO BE PRINTED ON A 24" X 36" SHEETITB 367-OC5436F:\2023036 Orange County Architectural Services\2-Drawings\9 - Revit\Piedmont Food Processing\2023036 Peidmont Food Processing.rvt9/17/2024 10:33:15 AMA1-01FLOOR PLAN,ELEVATIONS ANDDETAILS2023036 16 SEPT 2024DWDWORANGE COUNTY, NC - FACILITY RENOVATIONSPIEDMONT FOOD PROCESSING CENTER WINDOW REPLACEMENT500 Valley Forge Rd, Hillsborough, NC 27278CONSTRUCTION DOCUMENT1/8" = 1'-0"A1-011FLOOR PLAN04'8'16'32'1/2" = 1'-0"A1-012WINDOW LEGEND1/4" = 1'-0"A1-013BUILDING ELEVATION - SOUTH3" = 1'-0"A1-014TYP. STOREFRONT HEAD3" = 1'-0"A1-015TYP. STOREFRONT JAMB3" = 1'-0"A1-016TYP. STOREFRONT SILLREGISTEREDARCHITECTURALCORPORATIONNORTHCAROLINAARCHITECTU,PARALEIGH50172CERT. NO.RESINETTNSMIHTDocusign Envelope ID: 52FACC74-DA96-491B-B0B8-04AC3961737D