Orange County NC Website
Browse       Search
<br /> <br /> <br /> <br />05/03/2024_CLC Version <br />© OTIS ELEVATOR COMPANY, 2024 All Rights Reserved Page 4 of 22 <br />Section 2 <br /> <br /> <br /> <br />OPERATION <br /> <br /> <br />NEW AUTOMATIC SELF-LEVELING <br />The elevator shall be provided with automatic self -leveling that shall typically bring the elevator car <br />level with the floor landings + ¼” regardless of direction of travel. The automatic self -leveling shall <br />correct for over travel or under travel and rope stretch. <br /> <br />NEW SPECIAL EMERGENCY SERVICE <br />Special Emergency Service operation shall be provided in compliance with the latest applicable <br />revision of the ASME/ANSI A17.1 Code. <br /> <br />Special Emergency Service Phase I to return the elevator(s) non-stop to a designated floor shall be <br />initiated by an elevator smoke detector system or a keyswitch provided in a lobby fixture. <br /> <br />The smoke detector system, if required, is to be furnished by others. The elevator contractor shall <br />provide contacts on the elevator controller to receive signals from the smoke detector system. <br /> <br />A keyswitch in the car shall be provided for in-car control of each elevator when on Phase II of <br />Special Emergency Service. <br /> <br />If an elevator is on independent service when the elevators are recalled on Phase I operation, a <br />buzzer shall sound in the car and a jewel shall be illuminated, subject to applicable codes. <br /> <br />NEW INDEPENDENT SERVICE <br />When the Independent Service switch in the car operating panel is actuated; it shall cancel previously <br />registered car calls, disconnect the elevator from the hall buttons, and allow operation from the car <br />buttons only. Door operation shall occur only after actuation of the “DOOR CLOSE” button. <br /> NEW INSPECTION OPERATION <br />For inspection purposes, an enabling keyswitch shall be provided in the car operating panel to <br />permit operation of the elevator from on top of the car and to make car and hall buttons <br />inoperative. <br /> <br />HOISTWAY ACCESS SWITCHES <br />An enabling keyswitch shall be provided in the car operating panel to render all car and hall buttons <br />inoperative and to permit operation of the elevator by means of an access keyswitch adjacent to the <br />hoistway entrance at the access landing. <br /> <br />OTIS ONE PLATFORM <br />Otis ONE is an internet of things (IoT) platform that enables advanced monitoring, big data analytics, and <br />predictive maintenance to address potential issues before they occur, increasing elevator uptime and <br />reducing service disruptions. Activation of these features is subject to execution of a separate Otis ONE <br />Docusign Envelope ID: 52FACC74-DA96-491B-B0B8-04AC3961737D