Orange County NC Website
Browse       Search
Orange County Architectural Renovations Smith Sinnett / 2023036 <br />Hillsborough, NC Orange County Asset Management Services <br />ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS08 41 13 - 4 <br />1. Build mockup of typical wall area as shown on Drawings. <br />2. Field testing shall be performed on mockups according to requirements in "Field Quality Control" Article. <br />3. Approval of mockups does not constitute approval of deviations from the Contract Documents contained in <br />mockups unless Architect specifically approves such deviations in writing. <br />4. Approved mockups may become part of the completed Work if undisturbed at time of Substantial Completion. <br />I. Preinstallation Conference: Conduct conference at Project site. <br />1.7 PROJECT CONDITIONS <br />A. Field Measurements: Verify actual locations of structural supports for aluminum-framed systems by field measurements <br />before fabrication and indicate measurements on Shop Drawings. <br />1.8 WARRANTY <br />A. Special Warranty: Manufacturer’s standard form in which manufacturer agrees to repair or replace components of <br />aluminum-framed systems that do not comply with requirements or that fail in materials or workmanship within specified <br />warranty period. <br />1. Failures include, but are not limited to, the following: <br />a. Structural failures including, but not limited to, excessive deflection. <br />b. Noise or vibration caused by thermal movements. <br />c. Deterioration of metals, metal finishes, and other materials beyond normal weathering. <br />d. Adhesive or cohesive sealant failures. <br />e. Water leakage through fixed glazing and framing areas. <br />f. Failure of operating components. <br />2. Warranty Period: Five years from date of Substantial Completion. <br />B. Special Finish Warranty: Manufacturer’s standard form in which manufacturer agrees to repair or replace components on <br />which finishes do not comply with requirements or that fail in materials or workmanship within specified warranty period. <br />Warranty does not include normal weathering. <br />1. Warranty Period: 10 years from date of Substantial Completion. <br />1.9 MAINTENANCE SERVICE <br />A. Entrance Door Hardware: <br />1. Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions as <br />needed for Owner’s continued adjustment, maintenance, and removal and replacement of entrance door hardware. <br />PART 2 - PRODUCTS <br />2.1 MANUFACTURERS <br />A. Basis-of-Design Product: Designs indicated on the Drawings are based on YKK series products. Subject to compliance with <br />requirements, provide product indicated on Drawings or comparable product by one of the following: <br />1. EFCO Corporation. <br />2. Kawneer North America; an Alcoa company. <br />3. Vistawall Architectural Products; The Vistawall Group; a Bluescope Steel company. <br />4. YKK AP America Inc. <br />Docusign Envelope ID: 52FACC74-DA96-491B-B0B8-04AC3961737D