Orange County NC Website
Browse       Search
Orange County Architectural Renovations Smith Sinnett / 2023036 <br />Hillsborough, NC Orange County Asset Management Services <br />METAL FABRICATIONS 05 50 00 - 2 <br />1.6 COORDINATION <br />A. Coordinate installation of anchorages for metal fabrications. Furnish setting drawings, templates, and directions <br />for installing anchorages, including sleeves, concrete inserts, anchor bolts, and items with integral anchors, that <br />are to be embedded in concrete or masonry. Deliver such items to Project site in time for installation. <br />B. Coordinate installation of steel weld plates and angles for casting into concrete that are specified in this Section <br />but required for work of another Section. Deliver such items to Project site in time for installation. <br />PART 2 - PRODUCTS <br />2.1 MANUFACTURERS <br />A. In other Part 2 articles where titles below introduce lists, the following requirements apply to product selection: <br />1. Available Products: Subject to compliance with requirements, products that may be incorporated into <br />the Work include, but are not limited to, products specified. <br />2. Available Manufacturers: Subject to compliance with requirements, manufacturers offering products <br />that may be incorporated into the Work include, but are not limited to, manufacturers specified. <br />2.2 METALS, GENERAL <br />A. Metal Surfaces, General: Provide materials with smooth, flat surfaces, unless otherwise indicated. For metal <br />fabrications exposed to view in the completed Work, provide materials without seam marks, roller marks, rolled <br />trade names, or blemishes. <br />2.3 FERROUS METALS <br />A. Steel Plates, Shapes, and Bars: ASTM A 36/A 36M. <br />B. Rolled-Steel Floor Plate: ASTM A 786/A 786M, rolled from plate complying with ASTM A 36/A 36M or <br />ASTM A 283/A 283M, Grade C or D. <br />C. Steel Tubing: ASTM A 500, cold-formed steel tubing. For exterior installations and where indicated, provide <br />tubing with hot dip galvanized coating per ASTM A 53. <br />D. Steel Pipe: ASTM A 53/A 53M, standard weight (Schedule 40), unless another weight is indicated or required <br />by structural loads. Black finish unless otherwise indicated. Galvanized finish for exterior installations and <br />where indicated. <br />E. Cast Iron: ASTM A 48/A 48M, Class 30, unless another class is indicated or required by structural loads. <br />2.4 NONFERROUS METALS <br />A. Aluminum Plate and Sheet: ASTM B 209, Alloy 6061-T6. <br />B. Aluminum Extrusions: ASTM B 221, Alloy 6063-T6. <br />Docusign Envelope ID: 52FACC74-DA96-491B-B0B8-04AC3961737D