Orange County NC Website
Browse       Search
RESILIENT FLOORING AND ACCESSORIES <br /> <br />09 65 00 - 5 <br />Orange County Architectural Renovations Smith Sinnett / 2023036 <br />Hillsborough, NC Orange County Asset Management Services <br /> <br />G. Install floor tiles on covers for telephone and electrical ducts, building expansion-joint covers, and similar <br />items in installation areas. Maintain overall continuity of color and pattern between pieces of tile installed <br />on covers and adjoining tiles. Tightly adhere tile edges to substrates that abut covers and to cover <br />perimeters. <br /> <br />H. Adhere floor tiles to substrates using a full spread of adhesive applied to substrate to produce a completed <br />installation without open cracks, voids, raising and puckering at joints, telegraphing of adhesive spreader <br />marks, and other surface imperfections. <br /> <br /> <br />3.5 CLEANING AND PROTECTION <br />A. Comply with manufacturer's written instructions for cleaning and protection of resilient products. <br />B. Perform the following operations immediately after completing resilient product installation: <br />1. Remove adhesive and other blemishes from exposed surfaces. <br />2. Sweep and vacuum surfaces thoroughly. <br />3. Damp-mop surfaces to remove marks and soil. <br />C. Protect resilient products from marks, indentations, and other damage from construction operations and <br />placement of equipment and fixtures during remainder of construction period. <br />1. Follow manufacturers recommendations for protective flooring treatment or polish. <br />2. Coordinate flooring maintenance with Owner's maintenance service. <br />3. Cover resilient accessories on floors and stairs with undyed, untreated building paper until inspection <br />for Final Acceptance. <br />D. Cover resilient products until Substantial Completion. <br />E. Clean products specified in this Section not more than 4 days prior to dates scheduled for inspections intended <br />to establish date of Final Acceptance in each area of Project. <br />F. Clean products using method recommended by manufacturer. <br /> <br /> <br /> <br />END OF SECTION <br />Docusign Envelope ID: 52FACC74-DA96-491B-B0B8-04AC3961737D