2024-702-E-AMS-Sparrow & Sons-Library - Replace Hot Water Heater and Two Water Fountains with bottle fillers

Browse Search

© January 2018 State Water Heaters. All Rights Reserved www.statewaterheaters.com | 800-365-0024 Toll-Free USA Page 4 of 4 SCESS00508 Commercial Electric Water Heaters FOR MORE INFORMATION ON SANDBLASTER® CONTACT: STATE WATER HEATERS 500 TENNESSEE WALTZ PARKWAY, ASHLAND CITY, TN 37015 • 800-365-0024 TOLL-FREE USA • STATEWATERHEATERS.COM SUGGESTED SPECIFICATION The heater(s) shall be Sandblaster® Surface Mount Thermostat CSB Series Model Number ______________ -SFE(A) as manufactured by State Water Heaters. Heater(s) shall be rated at ____________ kW,_______volts, ____________ phase, 60 cycle AC, and listed by Underwriters’ Laboratories and approved to the NSF Standard 5 by UL. Tank(s) shall be ________ (50, 80 or 119) gallon capacity. Tanks shall have __________ (150 [Std] or 160 [ASME]) psi working pressure and be equipped with extruded high density anode. All internal surfaces of the heater(s) exposed to water shall be glasslined with an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be low watt density. Each element shall be controlled by an individually mounted thermostat and high temperature cut-off switch. All internal circuits shall be fused. The outer jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance through hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located in the front for ease of servicing. Heater tank shall have a three year limited warranty as outlined in the written warranty. Manufacturer shall supply ASME rated temperature and pressure relief valve. Fully illustrated instruction manual to be included. Meets standby loss requirements of the U. S. Department of Energy and current edition of ASHRAE/IES 90.1. *208 volt models may contain three (3) additional elements. For ASME Construction add “A” to the end of the model number (example: CSB 52 24 SFEA). kW Input Model Numbers Tank Capacity in Gallons Number of Elements Element Wattage Full Load Current in Amperes Single Phase Three Phase 50 80 119 208V 240V 277V 480V 208V 240V 480V 6 CSB 52 6 SFE CSB 82 6 SFE CSB 120 6 SFE 3 2,000 28.8 25 21.7 12.5 16.7 14.4 7.2 9 CSB 52 9 SFE CSB 82 9 SFE CSB 120 9 SFE 3 3,000 43.3 37.5 32.5 18.8 25 21.7 10.8 12 CSB 52 12 SFE CSB 82 12 SFE CSB 120 12 SFE 3 4,000 57.7 50 43.3 25 33.3 28.9 14.4 13.5 CSB 52 13.5 SFE CSB 82 13.5 SFE CSB 120 13.5 SFE 3 4,500 64.9 56.3 48.7 28.1 37.5 32.5 16.2 15 CSB 52 15 SFE CSB 82 15 SFE CSB 120 15 SFE 3 5,000 72.1 62.5 54.2 31.3 41.6 36.1 18 18 CSB 52 18 SFE CSB 82 18 SFE CSB 120 18 SFE 3*6,000 86.5 75 65 37.5 50 43.3 21.7 24 CSB 52 24 SFE CSB 82 24 SFE CSB 120 24 SFE 6 4,000 115.4 100 86.6 50 66.6 57.7 28.9 27 CSB 52 27 SFE CSB 82 27 SFE CSB 120 27 SFE 6 4,500 129.8 112.5 97.5 56.3 74.9 65 32.5 30 CSB 52 30 SFE CSB 82 30 SFE CSB 120 30 SFE 6 5,000 144.2 125 108.3 62.5 83.3 72.2 36.1 36 CSB 52 36 SFE CSB 82 36 SFE CSB 120 36 SFE 6*6,000 173.1 150 130 75 99.9 86.6 43.3 40.5 N/A CSB 82 40.5 SFE CSB 120 40.5 SFE 9 4,500 194.7 168.8 146.2 84.4 112.4 97.4 48.7 45 N/A CSB 82 45 SFE CSB 120 45 SFE 9 5,000 216.3 187.5 162.5 93.8 124.9 108.3 54.1 54 N/A CSB 82 54 SFE CSB 120 54 SFE 9 6,000 N/A 225 194.9 112.5 149.9 129.9 65 Docusign Envelope ID: C8846755-2774-491F-B283-2EAAB9138A4C