Agenda - 10-01-2024; 8-f - Fiscal Year 2024-25 Ambulance Purchase

Browse Search

37 1679 dividers above&below the shelf creating ten storage spaces. The cabinet will have 1680 a restocking feature to make the storage spaces more accessible. 1681 **Supply a Technimount Pro Series 35 Std Surface Base#100-20-UN and Heavy-Duty 1682 Bracket#210-1 1-PC1 5-HD. The base will be installed at delivery aft of the CPR seat. 1683 ** REF. Line 1662: This Cabinet K will have a left-hinged polycarbonate door with 1684 (5)adjustable shelves and will extend down to the top of the squad bench. Ensure 1685 the door is built so it will clear the squad bench cushion when opened. The cabinet 1686 handle will be no longer than 12". 1687 1688 BIO-HAZARD/TRASH CONTAINERS: 1689 1693 ( 1 ) DELETE both wall mounted Maxxim kits 1712 ( 1 ) *Shorten the curbside squad bench and install an access door for two 1713 one-gallon containers(one Sharps and one Trash). Each container will 1714 have its own hinged surface-mounted polycarbonate lid (one red and one clear, 1715 each with a knob)built into the access door. The access door will have a flush- 1716 mounted stainless steel key locking latch for container removal. 1727 ( 1 ) *The head-knocker over the side entry door shall provide storage for the 1728 * placement of the following number of glove boxes: 3 1741 1742 CUSTOMER NOTES/SPECIAL REQUESTS 1743 **A drop-in storage shall be located in the top of the aft end of the action area counter 1744 for sharps storage. The container lid will protrude through the top of the counter with a 1745 hinged door&the lid around the flat top of container. The container opening will face 1746 CPR seat.The storage will be large enough for a 11.5" H x 10.5"W x 5" D container. 1747 This area of the solid surface countertop will be flat. 1748 ** REF. Line 1712: The storage at the head of the squad bench will be drop-in storage 1749 for a Covidien Biohazard UN3291, Lot#00171463 container 11.5" H x 10.5"W x 5" D. 1750 The lid will protrude through the top of the storage area with a hinged door&a cover 1751 around the top to cover the extra space. Dimensions are critical to ensure the container 1752 will drop into the space provided. 1753 1754 SEATING/UPHOLSTERY: OPTIONS 1755 1756 Padded vinyl head protectors over module entryways, color coordinated to match interior 1762 ( 1 ) *Maroon color for upholstery (Ruby) 1768 ( 1 ) Net at head of Squad Bench, standard 58"x 17" (Red unless specified in Customer Notes) 1784 1785 FLOOR COVERING: OPTIONS 1786 1787 Heavy duty vinyl floor covering will be installed inside patient compartment 1788 ( 1 ) * Lonseal/Lonplate II flooring this oring will extend up the side walls 1797 Type of floor selected above: I Floor color lCurbside wall covered in: Streetside wall covered in: 1798 * Lonseal/Lonplate II flooring 421 Mica Floor covering Floor covering 1807 1808 HANDRAILS/MOUNTING BRACKETS: OPTIONS 1809 1810 ( 1 ) All handrails will be stainless steel, knurled, antimicrobial rails painted (powder coated)yellow. 1823 1825 COT / LITTER MOUNT: OPTIONS 1826 (Brand) (Model) 1827 The cot used in this unit will be a: Stryker PowerPro 1828 The cot will be supplied by: Customer 1829 The retention system will be supplied by: Customer 1830 Purchaser/Customer agrees to idemnify and hold Excellance harmless for the installation of any 1831 cot retention system specified by the Customer that is not compliant with any governmental authority. 1832 1833 The mounting position for the cot shall be: 1834 ( 1 ) * Center mount for one cot 1838 ( 1 ) Post and wheel cups will NOT be installed in the patient compartment. 1844 1845 THE COT WILL BE SUPPLIED BY CUSTOMER 1849 THE RETENTION SYSTEM WILL BE SUPPLIED BY CUSTOMER AQ Version 23.2 Page 9 of 15 7/22/2024 9:26 AM