Orange County NC Website
Browse       Search
REMOUNT PRICING 24 <br /> Version 23.0 <br /> 1774 Cab Console Options <br /> 1775 Console Type <br /> Replace floor console-Type 1 - includes spotlight, switches, meter(volt and amp), map light, indicator lights. DOES <br /> 1776 ( 1 ) NOT INCLUDE NEW SIREN OR MAP BOOK STORAGE. <br /> 1778 ( 1 ) Map/Binder case mounted on floor in cab. <br /> 1779 Enter the number of spaces up to 3 for map storage: (3)w/two Adj. Dividers <br /> 1780 Enter the amount in inches up to 2" between each storage space: 4" <br /> 1781 <br /> 1782 ( 1 ) Install 2 cup holders in the front cab console NOTE: This option is available on new consoles <br /> 1784 <br /> 1826 CUSTOMER NOTES AND SPECIAL REQUESTS <br /> 1827 **Delete the standard map light on the front cab console. <br /> 1828 <br /> 1829 Install a new personnel "Door Open" buzzer on the cab console to be activated when in gear. <br /> 1830 <br /> Install a Mermaid Dual Temp unit#MKDUAL TEMP in the ALS compartment.The (2)control panels will be installed <br /> on the interior R4 cabinet wall in the bulkhead area. Ensure the heating and cooling features of the Mermaid unit <br /> 1831 function properly. <br /> 1832 <br /> 1833 '' Cabinet modification to install the Mermaid Dual Temp unit into the ALS(H2 cabinet). <br /> 1834 <br /> The existing docking station pole on the console will not be reinstalled. Install Gamber Johnson iPad mounting <br /> system on the passenger's side of the cab console. (1) Universal Vertical Base#DS-138; (1)7"Center-Mounted <br /> Complete Upper Pole#7160-0178; (1)Tall Tablet Display Mount#7160-0529; and (1) Notepad Touch Universal Tablet <br /> 1870 Cradle#7160-1299-00. <br /> 1871 <br /> **Install (2)customer-supplied radios and tranceiver. One radio will be installed in the cab console&a speaker on the <br /> back wall of the cab above the pass-thru window and one radio will be installed in the action area along with one <br /> speaker. The radios are to be wired for operating condition. Install an extruded aluminum cover around the transceiver <br /> in the 1-3/2 compartment to protect it from damage. The new radio system will come with new antennas. Do not <br /> 1872 transfer old antennas. <br /> 1873 <br /> Permanently remove the existing Stealth Power components from the 1-3/2 compartment. Do Not transfer the <br /> 1874 existing Stealth power button to the new console or any other components in the unit related to the Stealth system. <br /> 1875 <br /> 1876 **Remove the(8)LED dome light lenses and clean the inside of the lenses and re-install. <br /> 1877 <br /> 1985 CUSTOMER NOTES AND SPECIAL REQUESTS <br /> ** Install a customer-supplied Sierra Wireless Gateway system wiring harness and antenna.The wires shall terminate <br /> behind the passenger's seat in the cab.The power cable is a gray three-wire cable. The black wire is ground with the <br /> red being 12 volt battery power and the white is ignition/accessory,which should have 12V when the truck is running. It <br /> should terminate alongside the antenna cables. Both should have at least 18"of slack. The antenna will be installed on <br /> 1986 the cab roof. <br /> 1987 <br /> 1988 **The (3)existing Trucklite LED lights in the center trough will remain. <br /> Rev: 5/18/23 Page 12 of 16 9/17/2024 8:07 AM <br />