Orange County NC Website
Browse       Search
REMOUNT PRICING 23 <br /> Version 23.0 <br /> 1611 <br /> 1657 CUSTOMER NOTES AND SPECIAL REQUESTS <br /> ** Install (1)red 6-point harness at the CPR seat location. This option includes barstock to be welded behind the <br /> streetside wall and into the wall structure for the harness to secure in to. The existing streetside wall shall be reused. <br /> 1658 The customer will be advised if the wall is not able to be reused. <br /> 1659 <br /> ** Install (2)red 6-point harnesses at the squad bench seat location.This option includes barstock to be welded behind <br /> the curbside wall and into the wall structure for the harnesses to secure in to new curbside wall. The existing curbside <br /> 1660 wall shall be reused. The customer will be advised if the wall is not able to be reused. <br /> 1661 <br /> **Do Not reinstall the existing Engel cooler&mounting bracket after the floor covering has been replaced. The cooler <br /> 1662 &mounting bracket will be placed in loose equipment. Also remove any wiring that runs to the cooler. <br /> 1663 <br /> 1666 Seating/Upholstery Options <br /> Replace vinyl covered padded squad bench seat cushion, split lid. Enter the number of hinged squad bench sections <br /> 1670 ( 1 )desired for replacement. <br /> 1671 Specify Aft or Forward Section of squad bench to be replaced: SINGLE LID <br /> 1682 ( 1 ) Replace CPR seat pad <br /> 1683 ( 1 ) Replace fixed CPR seat backrest <br /> Wise Brand HiBAC Attendant seat with built-in 5 Point Child Safety Seat-INCLUDES SEAT BASE OF CHOICE- <br /> 1692 ( 1 ) PLEASE SELECT THE STYLE SEAT BASE DESIRED: <br /> 1693 Specify the seat base style to be used (SWIVEL OR FIXED BOX): SWIVEL <br /> 1707 ( 1 ) Replace Rear Head Knocker <br /> 1709 <br /> 1710 CUSTOMER NOTES AND SPECIAL REQUESTS <br /> **Also replace the following upholstery/padding:Aft squad bench vertical corner pad; vertical trim beside cabinet B <br /> down to the countertop; horizontal pad underneath cabinet D; aft center trough pad;trim at head of the squad bench; <br /> 1711 vertical corner post of the ALS cabinet; &vertical trim to the right of cabinet D. <br /> 1712 <br /> 1713 **Ref. Line#1692:Attendant seat will have red 6-point harness system. <br /> 1714 <br /> 1715 ** Install barstock into the existing floor structure and install a customer-supplied Stryker PowerLoad System. <br /> 1716 <br /> 1717 **Replace the round black plastic knob on the sharps access door at the head of the squad bench. <br /> 1718 <br /> 1750 Electrical System <br /> 1751 Electrical System Options <br /> 1763 ( 1 ) Replace all rocker switches with rocker switches of the same or equal specifications at the action area control panel. <br /> Replace individual lighted rocker switches in the rear action area control panel-Enter the number of switches to be <br /> 1764 ( 5 ) replaced <br /> 1765 Specify Location of the 1st switch: (2) Right rear door <br /> 1766 Specify Location of the 2nd switch: Curbside wall by R3 <br /> 1767 Specify Location of the 3rd switch: Curbside wall by R3 <br /> 1768 Specify Location of the 4th switch: Curbside wall by R3 <br /> Rev: 5/18/23 Page 11 of 16 9/17/2024 8:07 AM <br />