Orange County NC Website
Browse       Search
REMOUNT PRICING 21 <br /> Version 23.0 <br /> 1033 R-4 Compartment <br /> 1044 ( 1 ) Replace the heavy duty spring type door check <br /> Replace 1 ea. 206 latch with key locking stainless steel 9000 series D-ring handles with gaskets NOTE:for units that <br /> 1050 ( 1 )will be getting painted <br /> 1059 <br /> 1081 ( 1 )Stainless Steel Door Sill protector for compartment door sill <br /> 1085 <br /> 1098 ( 1 ) Non-Standard Compartment Specify The location of the compartment: R4/2 Battery Compt. <br /> 1145 ( 1 ) Stainless Steel Door Sill protector for compartment door sill <br /> 1150 <br /> 1177 Rear Doors <br /> 1179 ( 4 ) Replace or install 1 ea. 3"Grabber door checks (Enter the number of grabbers) <br /> Replace 1 ea. 206 latch with key locking stainless steel 9001 series D-ring handles with gaskets NOTE:for units <br /> 1183 ( 1 )that will be getting painted <br /> 1192 ( 1 ) Replace the existing slam latch mechanicals in the left rear door <br /> 1194 ( 2 ) Replace interior door handle with a FIXED"L"handle <br /> 1199 ( 1 ) Replace inner door mica panel on left rear entry door with white painted aluminum <br /> 1200 ( 1 ) Replace inner door mica panel on right rear entry door with white painted aluminum <br /> 1211 ( 1 ) Install 10" RED/WHITE reflective chevron striping on the lower kickplate of the interior Right rear door skin. <br /> 1212 ( 1 ) Install 10" RED/WHITE reflective chevron striping on the lower kickplate of the interior Left door skin. <br /> Add a flashing Led red OS series light to the interior side of the left rear entry door: This light shall activated anytime <br /> 1215 ( 1 )the door is open and Module Power is on.The light shall be located to the lower outer corner of the door. <br /> Add a flashing Led red OS Series light to the interior side of the right rear entry door:This light shall activated anytime <br /> 1216 ( 1 )the door is open and Module Power is on.The light shall be located to the lower outer corner of the door. <br /> 1217 <br /> 1218 R-3 Side Entry Personnel Door <br /> 1219 ( 1 ) Replace the heavy duty spring type door check <br /> Replace 1 ea. 206 latch with key locking stainless steel 9001 series D-ring handles with gaskets NOTE:for units <br /> 1221 ( 1 )that will be getting painted <br /> 1229 ( 1 ) Replace interior door handle with a FIXED"L"handle <br /> 1237 ( 1 ) Replace inner door mica panel on entry door with white painted aluminum <br /> 1239 ( 1 ) Door Sill protector for side personnel door <br /> Replace the existing side entry retention strap with a new strap(Only for trucks that currently have the strap feature in <br /> 1246 ( 1 ) place) <br /> 1248 ( 1 ) Install 10" RED/WHITE reflective chevron striping on the lower kickplate of the interior door skin. <br /> Add a flashing Led red OS Series light to the interior side of the side entry door: This light shall activated anytime the <br /> 1249 ( 1 )door is open and Module Power is on.The light shall be located to the lower outer corner of the door. <br /> 1251 <br /> 1252 Windows <br /> 1267 CUSTOMER NOTES AND SPECIAL REQUESTS <br /> **The existing windows will be reinstalled unless it is identified at check-in that they need to be replaced. If so, <br /> 1268 windows will be added. <br /> 1269 <br /> ** Install a ZICO electric step#VS-24-11 below the R3 curbside entry door. This includes an override switch to be <br /> 1270 connected to the existing circuit. <br /> Rev: 5/18/23 Page 9 of 16 9/17/2024 8:07 AM <br />