Orange County NC Website
Browse       Search
REMOUNT PRICING 15 <br /> Version 23.0 <br /> 134 <br /> 136 THE REMOUNT WILL HAVE THE FOLLOWING WORK INCLUDED/N THE STANDARD BASE CONVERSION: <br /> 137 CHASSIS INSPECTION <br /> 138 Inspected for damage and defects upon delivery <br /> 139 Test Drive <br /> The chassis shall be inspected against(A) Excellance's Chassis order, and (B)the specifications supplied by <br /> 140 the customer/dealer. <br /> 141 All loose equipment received with the chassis shall be inventoried and stored. <br /> All chassis functions shall be tested for proper operation (accelerator, brakes, headlights,wipers, horn, radio, <br /> 142 air conditioner, gauges, dome lights,turn signals, parking lights, etc.). <br /> 143 <br /> 144 CHASSIS WORK TO BE PERFORMED <br /> 145 Heat Shields shall be installed above the exhaust system. <br /> 146 Chassis shall have undercoating applied. <br /> 147 Exhaust modifications shall be performed as necessary. <br /> 148 Air valve extensions shall be installed on the rear inner tires. <br /> 149 New mounting hardware shall be installed including: Grade 8 bolts,washers, nylon lock-nuts, spacers, outriggers (Type I units only) <br /> 150 New mounting bracket for the rear bumper shall be installed to the chassis frame. <br /> 151 Chassis high idle system shall be connected and operational. <br /> 152 Chassis electrical charging/battery system shall be connected to the module electrical system. <br /> 153 New Chassis emergency light wiring shall be installed (Grille, Intersection lights, etc.) <br /> 154 All power cables connecting the chassis electrical system to the modular electrical system shall be replaced. <br /> 155 The chassis fuel fill shall be installed in accordance with current QVM standards. <br /> Modular Air conditioning system shall have a vacuum performed and shall be recharged with 134A Freon with <br /> 156 ultra-violet leak identification air conditioning oil dye installed into the system. <br /> 157 The module to chassis heater valves and pump shall be replaced. <br /> Chassis to module attachment shall be finished off via Excellance fabricated close out panels and a rubber <br /> seal on a Type III units.A cab to module rubber accordion style boot shall be installed on EHD and Type 1 <br /> 158 units. <br /> 159 New Front module mounted stone guards. <br /> 160 New back-up alarm <br /> Reattach all existing Radio wiring disconnected from the chassis by Excellance during the remount process. <br /> THIS IS LIMITED TO TWO(2) RADIO SYSTEMS-ADDITIONAL PRICING WILL BE ADDED FOR VEHICLES WITH <br /> 161 MORE THAN TWO RADIO SYSTEMS. <br /> 162 "No Smoking" Fasten Your Seatbelt"sticker shall be installed in the chassis cab. <br /> 163 <br /> 164 ADDITIONAL ITEMS TO BE PROVIDED <br /> 165 A professional Front End Alignment shall be performed on the chassis upon completion of the remount process. <br /> 166 The Fuel tank shall be full of fuel upon completion of the remount process. <br /> 167 All chassis engine fluid levels shall be inspected and adjusted as necessary. <br /> 168 Chassis tire pressure shall be inspected and adjusted as needed. <br /> 169 All hinges, latches, locks, door hold open devices etc. shall be lubricated. <br /> 170 Headlights shall be adjusted to the proper level. <br /> 171 The interior and exterior of the ambulance body and chassis cab shall be professionally washed and detailed. <br /> Rev: 5/18/23 Page 3 of 16 9/17/2024 8:07 AM <br />