2024-390-E-AMS-Brady Services-WCOB Server Room HVAC

Browse Search

Orange County West Campus Office Building -HVAC PDC Project 23020 HVAC GENERAL PROVISIONS 23 01 00 - 4 C.Electrical work shall be in accordance with all local,state and national codes and as specified in Division 26. D.Where architectural features and elements govern location of work,refer to Architectural drawings prior to fabrication of materials or system components. E.Refer to the Structural Drawings to become familiar with structural member sizes,framing type and configuration,opening sizes,and other details that could impact the work.Failure to coordinate with the Work of other trades,resulting in relocation of installed work to coordinate with architectural and/or structural elements,shall NOT be allowed as a basis for extra compensation by the contractor. F.Where piping,ductwork,or other items are indiacted to be routed in the webbing of joists or trusses,the mechanical contractor shall confirm with the General Contractor/Construction Manager and steel supplier the final joist/truss profile prior to fabricating or order materials.The actual final joist/truss profile shall be used in the BIM coordination effort. G.Openings for insulated piping shall be based on the outside diameter of the insulation with continuous insulation through the opening. H.Seal non-fire rated floor penetrations with non-shrink grout or urethane caulk,as appropriate. I.Seal non-rated wall openeings with urethane caulk. J.Duct/pipe/conduit penetrations through floor slabs of mechanical platforms or slabs above the bottom floor shall have water stopped curb surrounding the pipe/duct/conduit opening.Coordinate with Construction Manager/General Contractor to confirm openings based on Coordination Drawings. K.Pipe,conduit and duct chases required for installation of work shall be provided by the General Contractor unless otherwise noted. This Contractor shall be responsible for coordinating the location of all required chases. L.All work shall be coordinated with other trades. Cutting of new work and subsequent patching shall be at the Contractor's expense at no extra cost to the Owner. M.Contractor shall review the complete construction document package and determine,prior to the bid,which portions of the above grade structural slabs are hard rock concrete and/or light weight insulating concrete.Contractor shall review the Structural Engineer's requirements for attachment of loads to slabs,joists,trusses,and other structural members.DO NOT exceed point loads on Structural Engineer's drawings and details.Unistrut and/or other support appartus required to span multiple joists or beams shall be included in the Contractor's bid.No additional monies will be given for support steel or other components required to support Mechanical piping,duct, equipment,or other items. 1.08 GUARANTEE A.See the General and Supplementary General Conditions B.Where extended warranties or guarantees are available from the manufacturer,the Contractor shall prepare the necessary contract documents to validate these warranties as required by the manufacturer and present them to the Architect/Engineer. C.The Contractor shall include in his bid a full warranty and guarantee for a five (5)year period on the compressors for the refrigeration equipment,including all chillers. This warranty does not include labor following the first year's Labor and Material Warranty. PART 2 PRODUCT 2.01 GENERAL REQUIREMENTS A.Materials and equipment shall be new,unless noted otherwise,of the highest grade and quality and free from defects or other imperfections. Materials and equipment found defective shall be removed and replaced at the contractor's expense. B.The contractor shall provide name plates for identification of all equipment,switches,panels,etc. C.The name plates shall be laminated phenolic plastic,black front and back with white core,white engraved letters (1/4"minimum)etched into the white core. Name plates shall be fastened with Docusign Envelope ID: 8DED1454-68D2-4E36-9FC6-E56FF2124E5D