|
467
<br /> ACTUAL FIELD CONDITIONS WILL IMPACT LIGHTING INTENSITIES AND FIELD ADJUSTMENTS MAY BE POLE m
<br /> NEEDED TO HEAD/LENSE ANGLE AND WATTAGE TO INCREASE/DECREASE LIGHTING LEVELS TO NOTES: HAND HOLE
<br /> MEET THE REQUIRED INTENSITIES. 1. PRIOR TO POURING CONCRETE,INTERNAL STRUCTURE IS TO BE r 7
<br /> INSPECTED BY A SIDES REPRESENTATIVE.WITHOUT INSPECTION,
<br /> GENERAL LIGHTING NOTES: POLE BASE WILL BE REMOVED AND REINSTALLED. COVER PER LIGHT NOTES: cliN N N Lu
<br /> 25' HEIGHT FROM FINAL GRADE TO TOP Q
<br /> 2. FORM POLE BASE FOUNDATION USING CONCRETE FORM POLE MANUAL 1. PRIOR TO POURING CONCRETE,INTERNAL STRUCTURE IS TO BE INSPECTED � � ,� �
<br /> OF LIGHTING FIXTURE EXTENDING FULL DEPTH OF BASE.SURFACE SHALL BE FREE OF BY A SIDES REPRESENTATIVE.WITHOUT INSPECTION,POLE BASE WILL BE � p
<br /> VOIDS AND BLEMISHES. ANCHOR BOLTS(4) REMOVED AND REINSTALLED. 0 0 0 co
<br /> 1. OWNER WILL MAINTAIN PROPOSED EXTERIOR PARKING LOT LIGHTING AND BUILDING MOUNTED 3. MEASUREMENTS ABOVE GRADE SHALL BE MADE WITH FURNISHED W/POLE 2. FORM POLE BASE FOUNDATION USING CONCRETE FORM EXTENDING FULL 0 0 0 0
<br /> LIGHTS.FIXTURES WILL BE INSPECTED SEMI-ANNUALLY AND BULBS WILL BE REPLACED AS NEEDED. REFERENCE TO THE HIGHEST POINT OF GRADE INTERSECTING 1"CHAMFER DEPTH OF BASE.SURFACE SHALL BE FREE OF VOIDS AND BLEMISHES.
<br /> THE POLE BASE. 3. MEASUREMENTS ABOVE GRADE SHALL BE MADE WITH REFERENCE TO THE
<br /> 4. MEASUREMENTS BELOW GRADE SHALL BE MADE WITH 3"MIN. HIGHEST POINT OF GRADE INTERSECTING THE POLE BASE.
<br /> 2. CONTRACTOR SHALL INSTALL PARKING LOT LIGHTING FIXTURES AT 25'HEIGHT. REFERENCE TO THE LOWEST POINT OF GRADE INTERSECTING FINISHED GRADE 4. MEASUREMENTS BELOW GRADE SHALL BE MADE WITH REFERENCE TO THE
<br /> THE POLE BASE. - - = LOWEST POINT OF GRADE INTERSECTING THE POLE BASE.
<br /> 3. CONTRACTOR SHALL COORDINATE WITH PME PLANS AND PME ENGINEER FOR ELECTRIC FEED 5. REMOVE AND DISPOSE ALL SURPLUS EARTH FROM POLE BASE 3,000 PSI [ -III-_� l' 5. REMOVE AND DISPOSE ALL SURPLUS EARTH FROM POLE BASE EXCAVATION
<br /> EXCAVATION AND BACK FILLING TO MAINTAIN THE
<br /> SERVICE LOCATIONS SO THAT NECESSARY CONDUIT FOR LIGHT POLES CAN BE INSTALLED PRIOR TO CONCRETE - - AND BACK FILLING TO MAINTAIN THE BASE-TO-GRADE DISTANCE WITHIN 12"
<br /> BASE-TO-GRADE DISTANCE WITHIN 12"AROUND THE BASE. _-i AROUND THE BASE.
<br /> PAVING OPERATIONS. 6. ANCHOR BOLTS AND POLE WIRING PER MANUFACTURE'S L I I
<br /> 6. ANCHOR BOLTS AND POLE WIRING PER MANUFACTURE'S
<br /> RECOMMENDATIONS. GROUND WIRE PER 24 L J 1 30" RECOMMENDATIONS.
<br /> 4. THE LENSES IN THE LIGHT FIXTURES SHALL NOT DROP BELOW THE LIGHT FIXTURE HOUSING. CONDUIT UP TO 3/4"O MAY BE IMBEDED FOR CONCEALED WIRING. MANUFACTURE MIN _ MIN POLE HT. O D V CONDUIT UP TO 3/4"O MAY BE IMBEDED FOR CONCEALED WIRING. fA
<br /> 7. CENTER POLE ON CONCRETE BASE.BLOT PATTERN IS TO MATCH 15'POLE 16" 5'-0" #6
<br /> J 7. CENTER POLE ON CONCRETE BASE.BLOT PATTERN IS TO MATCH POLE Z
<br /> 5. EXTERIOR LIGHTS TO OPERATE AS REQUIRED DURING BUSINESS HOURS. POLE BASE.ORIENT POLE BASE SUCH THAT FLAT SIDE OF POLE I < In In In n
<br /> ¢ BASE IS PARALLEL TO CURB LINE;HAND HOLE SHOULD BE ON 25'POLE 18" 6'-6" #7 BASE.ORIENT POLE BASE SUCH THAT FLAT SIDE OF POLE BASE IS O
<br /> $o GROUND ROD z z z z
<br /> �0"• OPPOSITE SIDE FROM PARKING AREA WHERE SUCH PARALLEL TO CURB LINE;HAND HOLE SHOULD BE ON OPPOSITE SIDE FROM w w w w U)
<br /> 6. LIGHT POLE BASES ADJACENT TO PARKING STALLS ARE TO BE SITUATED WITH A MINIMUM CLEARANCE ARRANGEMENT IS POSSIBLE. PARKING AREA WHERE SUCH ARRANGEMENT IS POSSIBLE. m � � �
<br /> OF 30"FROM BACK OF CURB.CONTACT ENGINEER FOR ALTERNATIVE SHOULD THIS REQUIREMENT 4-VERTICAL 8. ALLOW CONCRETE TO CURE FOR A MINIMUM OF 30 DAYS PRIOR TO cwn 0 0 0 0 U-1
<br /> CAUSE A CONFLICT. D REBAR,SIZE < O O O O
<br /> INSTALLING POLE.
<br /> 3/4"CONDUIT "V" 0 > > > >
<br /> STUBBED ABOVE ___ 1r
<br /> CONCRETE BASE �. O O O O
<br /> 1"CONDUIT < O O O O
<br /> STUBBED ABOVE a CD CD 0 0
<br /> CONCRETE BASE /S g4 A < < < <
<br /> /1 • 0MIN.3"COVER O11�
<br /> #4 TIES @ V O.C. Z_ 0 0 0 0
<br /> i _, •_ 0 1 1 ALL SIDES(TYP) = w w w w
<br /> O w w w w
<br /> SECTION A-A
<br /> POLE MOUNTED PARKING LIGHT ti CO M 't CO N
<br /> PROPOSED FULLCUT OFF AREA LIGHT, MOUNTED ON 25'POLE. LIGHT POLE FOUNDATION DETAIL o o J�Z W W=1
<br /> SEE POLE BASE/FOUNDATION DETAIL ON THIS SHEET. NTS � W zo Z° Z 5 z m U z
<br /> aP:0~-WJ°waoLLO
<br /> 7 °Z Q�w~zzUw0d�
<br /> � CCoOUaazKOOH
<br /> OC7 W �TaQWaUJ=�aQ
<br /> W Z i aw�<Z 0Co��
<br /> Ca �oE,�aolno�c-
<br /> �, � Z °D=aKZco M:X 0
<br /> C� W � zOOzaOF=xwO
<br /> W a °Z a J W Z Q W
<br /> p Z o ~vo����a. �a
<br /> O gaww>>wozwC)
<br /> � CA C7 �UZZV)C)�O=U
<br /> Z >UIJZ ooa�F-Ow
<br /> W a )UJ 3' ¢a []
<br /> rn J J Z a T O H
<br /> tz 7 w J F m O
<br /> W O U U
<br /> w w u.i
<br /> oUJI f Cn tr U:)W � W � � W
<br /> Z � < = LU Q
<br /> Z LU
<br /> � Q
<br /> W
<br /> F- F- ¢ m cn N
<br /> U U _J Z V o
<br /> U) N
<br /> LON33_1:
<br /> d ili
<br /> NOT FOR
<br /> CARO��''%
<br /> gyp••.•�'•rESS•I�',•• ;
<br /> 4
<br /> Catalog Number A
<br /> MGLED 24
<br /> EAO Notes Type
<br /> Mongoose Large LED LEADER IN LIGHTING SOLUTIONS �,,, /AMR• \\\\
<br /> LEADER IN LIGHTING SOLUTIONS //I I I I I111N\
<br /> CONSTRUCTION
<br /> MGLED The Mongoose LED offset roadway and area lighting product • Distribution options: Narrow Roadway (NR), Medium ORDERING INFORMATION Example: MGLED P2 40K MVOLT FT LT UN GRSD
<br /> provides significant energy and maintenance savings vs.HID Roadway(MR),Wide Roadway(WR),Forward Throw(FT), y
<br /> Mongoose Large LED luminaires. It offers the ultimate in application flexibility and Area Type(AR) v
<br /> with a uniquely designed advanced optical system and Optional Uplight Skirt(US)ensures no light above 90° LED Optics
<br /> attractive appearance. This combined with multiple lighting House side shield(HSS)option available MGLED Mongoose Large P1 35,000 nominal lumens 30K 3,000 KCCT MVOLT Auto-sensing voltage NR Narrow Roadway HT HIGH(27°45°) W
<br /> distributions, mounting options and the ability to tilt the Controls P2 41,000 nominal lumens 40K 4,000KCCT (120thru277) MR Medium Roadway LT LOW(1°-18°) C/*
<br /> fixture offers unequalled performance in a diverse set of 347 347 Volt ca .o
<br /> 7 pin NEMA photocontrol receptacle P3 45,000 nominal lumens 50K 5,000 K CCT WR Wide Roadway
<br /> applications ranging from interstates and parking lots. z
<br /> • Premium solid-state locking style photocontrol(PCBs)-10 P4 50,000 nominal lumens 480 480Volt FT Forward Throw(Type 4) ` W
<br /> Mechanical year rated life P5 55,000 nominal lumens XVOLT 277V-480V AR Area(Type S) W N
<br /> • Rugged grade A360diecast aluminum(<1%copper) Extreme long life solid state locking-style photocontrol z Cn
<br /> Tool-less access with stainless steel latches (PCLL)-20 year rated life P6 60,000 nominal lumensCM P7 64,000 nominal lumens yZ„,
<br /> • Rigorous 5-stage pretreatment, epoxy basecoat and Field adjustable output a,
<br /> polyester topcoat to ensure maximum durability nLight Air motion and daylight sensor
<br /> • Finish yields a finish that achieves a scribe creepage rating Programmable motion and daylight sensor Q
<br /> of 8 after 5,000 hours of salt spray , , z oo w
<br /> Certification&Standards - I
<br /> • Removable"power door'facilitates product installation cn N M
<br /> • CSA Certified to US and Canadian standards VT Veritcal Tenon GRSD Vitracoat Gray Adjustable/Pro rammable Options NEMA Label Option y M t
<br /> and maintenance Y 9 p ptA•v Corrosion resistant stainless-steel latches ensure secure Suitable for operation in an ambient temperature up to40°C MA Horizontal Arm GHSD Vitracoat Graphite AO FieldAdustableOut Output NL NEMA LABEL o a N M
<br /> /104°F for standard product p ) p o U r~
<br /> ' closure over the long fixture life o SPA Architectural BKSD Vitracoat Black �# U z en• Designlights Consortium (DLC)qualified product.Not all a,
<br /> • Multiple mounting configurations allow for attachment to versions of this product may be DLC qualified.Please check UN Universal(Rd.&Sq) GNSD Vitracoat Green Control Options NEMA Receptacle Options '
<br /> horizontal mastarms(MA),vertical tenon(VT),architectural the DLC Qualified Products List at www.designlights.org/ WHSD VitracoatWhite PCLL DTL Extreme LongLife TwistlockPhotocontrol PR7 7-pin
<br /> mounting to square poles(SPA)and universal mounting to
<br /> QPL to confirm which versions are qualified. BZSD Vitracoat Bronze for Solid State(20 year rated life) ;� o �,
<br /> round and square poles(UN) ai
<br /> • LM-79compliant PCSS DSSPremiumTwistlockPhotocontrolforSolid W �'
<br /> • All Mountings are 3G vibration rated per ANSI C136.31 DDBSD Vitracoat Dark Bronze Shielding options M
<br /> • The projected LED Lumen Maintenance shall be based only State(10 year rated life)
<br /> • Adj usta b le fi xtu re ti It from 0-45 d eg rees p rovi d es fl exi bi I ity onIESLM8008 and TM21 US Uplight Skirt
<br /> to optimize lighting performance P0C2 Programmable occ.and daylight sensor,for, HSS House Side Shield
<br /> BUY AMERICAN ACT mounting applications up to 20'
<br /> Electrical This product is assembled in the USA and meets the Buy POC4'' Programmable occ.and daylight sensor,for
<br /> • Standard surge protection is 20kV/1OkA"Extreme Level" mounting applications between 20'&40' Shorting Cap option
<br /> America(n) government procurement requirements under g
<br /> per ANSI C136.2 FAR, DFARS and DOT regulations. Please refer to www. RSDGRI nLight Air Occ.and daylight sensor SH SHORTING CAP
<br /> • LED light engines are rated>100,000 at 25°C,L70 acuitybrands.com/buy-american for additional information. ~J
<br /> • Electronic driver has an expected life of> 100,000 hours Notes
<br /> at25°C Warranty 1 For custom programm Ing of the sensor,a wirel ess handheld configuration W
<br /> • Rated for-40°C/-40°F minimum ambient 5-year limited warranty.This is the only warranty provided Accessories:Order as separateIIII number. tool,Part No.FSIR-1 00 shou Id be pu rchased,either fro m Legrand,or from
<br /> Programmable electronic driver with 0-1OV control leads and no other statements in this specification sheet create Acu ity(by special request).
<br /> SA® dft Driver voltage options:120-277V 50/60 Hz and 347 50/60 any warranty of any kind.All other express and implied Wire Guard Kit 2 Notwith P6,P7&NIVOLT;Notwith P4,P5,P6,P7&347/480;Notwith
<br /> C us In Hz and 480V 50/60 Hz warranties are disclaimed.Complete warranty terms located MGLEDWG Mongoose Large Wire Guard Kit POc2,POC4,AO,PR3,PR7.
<br /> • Luminaire ships with a 0-10v dimmable driver.Luminaire at:www.acuitybrands.com/support/warranty/terms-and- 3 XVOLT option only availablewith P1,P2,P3 and P4 performance packages. O
<br /> is continuous and step dimming capable via AO option or conditions Uplight Skirt 4 Not available with RSDGR,AOand P117options.Not available with
<br /> B_ controls installed on P7 photocontrol receptacle option. MGLED US GRSD Mongoose Large Uplight Skirt,Vitracoat Gray Performance packages P4,P5,P6 or P7 and voltages 347&480. 1
<br /> Note:Actual performance may differ as a result of end-user MGLED US GHSD Mongoose Large Uplight Skirt,Vitracoat GraphPerfite
<br /> F-�I
<br /> Optical environment and application. MGLED US BKSD Mongoose Large Uplight Skirt,Vitracoat Black W
<br /> • IP66 rated b s comparable glass
<br /> s optics
<br /> ensure00 t ng All values are design or typical values, measured under J
<br /> • IP66 rated borosilicate glass optics ensure longevity and g yp MGLED US GNSD Mongoose LargeUplightSkirt,VitracoatGreen
<br /> minimize dirt depreciation laboratory conditions at25°C. MGLED USWHSD Mongoose Large Uplight Skirt,VitracoatWhite W
<br /> • 3000K,4000K and 5000K CCT,70 CRI MGLED US BZSD Mongoose Large Uplight Skirt,Vitracoat Bronze O F�
<br /> MGLED US DDBSD Mongoose Large Uplight Skirt,Vitracoat Dark Bronze w ^^+
<br /> DIMENSIONAL DATA House Side Shield
<br /> LOW TILT HIGH TILT Z
<br /> MGLED HSS Mongoose Large House Side Shield
<br /> 1 1
<br /> a O �
<br /> 40.8(1036 mm) 6.7 7.7 MOUNTING OPTIONS Q
<br /> (170mm) (195mm)
<br /> 24.8
<br /> (630mm) F� f' 1 Z w
<br /> 22.1 (561 mm) Q 2
<br /> Low Tilt Z 0 Z) /I1
<br /> 43.1 (1095 mm) W U O z
<br /> Zo
<br /> 6.6 32.3(820mm) I--� W m
<br /> Uptight Skirt Olf U)
<br /> (168mm) High Tilt �: J (n
<br /> a
<br /> Maximum Weight-55lbs �l7.7(450mm) = J
<br /> Maximum Effective Projected Area: Vertical Tenon Mount-VT Horizontal Arm Mount-MA Architectural Mount-SPA Universal Mount-UN
<br /> Low Lilt=1.20 sq.ft. Attaches to 2"vertical tenon Attaches to 2"horizontal mast arm Attaches to square pole Attaches to square or 3"minimum PROJECT NO.
<br /> High Lilt=315 sq.ft.
<br /> (2 3/8"O.D.) (2 3/8"O.D.) round pole 22-0214
<br /> Holophane One 1 Phone: www.holophane.com techsupportinf@acuitybrands.com MGLED Holo hane One Conyers, Phone: www.holophane.com techsu ortinf@acuit brands.com MGLED
<br /> S�4culty8rands ��lcuiiy8rands p � R Y � � P � PP Y DRAWING NAME:
<br /> ©2019-2022 Acuity Brands Lighting,Inc.All rights reserved. Rev.12/29/22 Specifications subject to change without notice. Page 1 of 7 ©2019-2022 Acuity Brands Lighting,Inc.All rights reserved. Rev.12/29/22 Specifications subjectto change without notice. Page 2 of 7
<br /> 22-0214_D.dwg
<br /> SHEET NO.
<br /> D-2
<br />
|