5-1-24 PB Agenda Packet - Laserfiche WebLink

Browse Search

(2) Stormwater Management Plans (SMPs) as necessary to be approved by the Erosion Control Officer prior to the issuance of a Zoning Compliance Permit, and (3) Building construction plans to be approved by the Building Official prior to issuance of a building permit. 2.5.3 Plan Specifications Each site plan shall be drawn at a scale adequate to show required detail and shall contain the following information: (A) The boundary of the lot(s) to be developed labeled with bearings and distances; (B) The name, address, and phone number of the applicant and the property owner; (C) Name of project, vicinity map, north arrow, scale, tax map reference number, date of plan preparation, and subsequent revision dates; (D) Zoning of the property to be developed and all adjacent zoning and existing adjacent land uses; (E) Adjacent right-of-way widths with road names and numbers; (F) A development summary including total acres, proposed use(s), total building square footage, required and proposed parking spaces. (G) Demonstrated compliance with all applicable performance standards contained in Articles 3, 4, 5, and 6 of this Ordinance; (H) Maximum and proposed impervious surface and required stream buffers as detailed in Sections 4.2 and 6.12 of this Ordinance; (I) Estimated traffic generated by the proposed development in trips per day. If the estimate exceeds 800 trips per day, a traffic impact study must be submitted in accordance with Section 6.17; (J) Front, side, and rear building setbacks as required by Articles 3 and 5 of this Ordinance; (K) Location of all proposed buildings and structures labeled with floor area, building height and function, and proposed finished floor elevation; (L) Vehicular use areas including existing and proposed streets and access drives, off street parking and loading to comply with Section 6.9 of this Ordinance, and entry/exit points of adjacent parcels; (M) Overhead and underground utilities with accompanying easements and storm drainage facilities/easements (including septic tanks and wastewater disposal fields, wells, fire hydrants, irrigation, and security lights); (N) Solid waste disposal facilities; (O) All proposed free-standing and wall-mounted signs. Signs must comply with Section 6.12 of this Ordinance; (P) A landscape plan demonstrating compliance with Section 6.8 of this Ordinance; (Q) For all developments other than those regulated by the NC Residential Code single- family residential, and duplexes, existing contour lines (dashed) and proposed contours (solid) at 5-foot intervals with 10-foot contours bold. Where site conditions warrant, 2-foot contours may be required; (R) Retaining walls, tree wells, or rip rap as part of the grading plan; (S) Streams, ponds, drainage ditches, swamps, floodway and floodplain boundaries; (T) Phase lines and numbers if the development is to be phased; 109