Orange County NC Website
Browse       Search
8/06/2020 <br /> <br />07 13 00 BELOW GRADE WATERPROOFING Page 2 of 6 <br /> <br />E. Submit shop drawings showing detailing and components for conditions anticipated. Details may <br />not be altered from the design drawings unless changes are specifically noted on the shop <br />drawings and approved by the Designer prior to installation. The Designer may request that shop <br />drawings be reviewed by the manufacturer, especially if significant variance from manufacturer’s <br />standard details is present. <br />F. Submit a sample copy of the system manufacturer’s standard material warranty. <br />1.4 QUALITY ASSURANCE <br />A. Obtain waterproofing membrane materials from a single manufacturer with not less than 10 years <br />of successful experience in manufacturing and supply of below grade waterproofing products. <br />Provide other system components such as primers, insulation, mastics, sealants, termination bar, <br />fasteners and metal flashings, as approved by manufacturer of primary membrane materials. <br />B. Contractor shall be an approved/authorized applicator of the manufacturer for installation of the <br />product to be installed. Approved status must be in-place prior to the bid date. <br />C. Use adequate number of skilled workmen who are trained and experienced in the necessary crafts <br />and who are familiar with the specified requirements and the methods needed for performance of <br />the Work. Contractor shall have a minimum of three (3) years of experience with the installation <br />of below grade sheet waterproofing systems. <br />D. Comply with pertinent codes and regulations including recommendations contained in the most <br />recent edition of The NRCA Waterproofing Manual published by the NRCA and the <br />manufacturer’s written installation instructions. Where manufacturer or NRCA <br />recommendations differ from the design specifications and drawings, the more stringent <br />requirement will take precedence unless otherwise agreed upon with the Designer. <br />E. If requested, provide an inspection by the manufacturer’s technical representative during system <br />installation, technical assistance, and material application guidance as necessary to complete the <br />system installation in accordance with the manufacturer’s requirements and these specifications. <br />1.5 PROJECT CONDITIONS <br />A. Work under this section will be performed at exterior walls of the Whitted Complex (Buildings <br />A, B, and Recreation Center at specific locations identified on the drawings. These buildings are <br />accessible by the public and some interior spaces are adjacent to work include medical/dental <br />clinic spaces and may require coordination with the Owner’s representative to protect the safety <br />of the public and prevent conflict or disruption of interior operations. <br />B. Access to the exterior walls is generally not limited. Isolated areas may include ground-mounted <br />equipment, utilities services or landscaping. Field verify access conditions to ensure that <br />materials, workers, and equipment to be used are acceptable. If any specialized equipment, <br />disconnection or temporary relocation of equipment, training, or inspection is required for access <br />or proper performance, the contractor must include these within the bid and work scope. <br />DocuSign Envelope ID: 7D9ACD4F-8F6C-42B6-9ADB-C60032DB6D03