Orange County NC Website
Browse       Search
9/2/2020 <br /> <br />32 17 23 PAVEMENT MARKINGS Page 2 of 2 <br />PART 2 - PRODUCTS <br />2.1 PAVEMENT-MARKING PAINT <br />A. Pavement-Marking Paint: Alkyd-resin type, lead and chromate free, ready mixed, complying with <br />AASHTO M 248, Type N; colors complying with FS TT-P-1952. <br />1. Color: As shown on Drawings. <br />B. Per NCDOT 2018 Asphalt QMS Manual <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Verify that pavement is dry and in suitable condition to begin pavement marking according to <br />manufacturer's written instructions. <br />B. Proceed with pavement marking only after unsatisfactory conditions have been corrected. <br />3.2 PAVEMENT MARKING <br />A. Do not apply pavement-marking paint until layout, colors, and placement have been verified with <br />Engineer. <br />B. Allow paving to age as recommended by manufacturer... <br />C. Sweep and clean surface to eliminate loose material and dust. <br />D. Apply paint with mechanical equipment to produce pavement markings, of dimensions indicated, <br />with uniform, straight edges. Apply at manufacturer's recommended rates to provide a minimum <br />wet film thickness of 15 mils. <br />1. Apply graphic symbols and lettering with paint-resistant, die-cut stencils, firmly secured <br />to pavement. Mask an extended area beyond edges of each stencil to prevent paint <br />application beyond the stencil. Apply paint so that it cannot run beneath the stencil. <br />3.3 PROTECTING AND CLEANING <br />A. Protect pavement markings from damage and wear during remainder of construction period. <br />B. Clean spillage and soiling from adjacent construction using cleaning agents and procedures <br />recommended by manufacturer of affected construction. <br />END OF SECTION 32 17 23 <br />DocuSign Envelope ID: 7D9ACD4F-8F6C-42B6-9ADB-C60032DB6D03