Orange County NC Website
Browse       Search
9/2/2020 <br /> <br /> 016000 - 4 <br />PART 2 - PRODUCTS <br />2.1 PRODUCT SELECTION PROCEDURES <br />A. General Product Requirements: Provide products that comply with the Contract Documents, are <br />undamaged and, unless otherwise indicated, are new at time of installation. <br />1. Provide products complete with accessories, trim, finish, fasteners, and other items needed <br />for a complete installation and indicated use and effect. <br />2. Standard Products: If available, and unless custom products or nonstandard options are <br />specified, provide standard products of types that have been produced and used <br />successfully in similar situations on other projects. <br />3. Owner reserves the right to limit selection to products with warranties not in conflict with <br />requirements of the Contract Documents. <br />4. Where products are accompanied by the term "as selected," Architect will make selection. <br />5. Where products are accompanied by the term "match sample" sample to be matched is <br />Architect's. <br />6. Descriptive, performance, and reference standard requirements in the Specifications <br />establish salient characteristics of products. <br />B. Product Selection Procedures: <br />1. Product: Where Specifications name a single manufacturer and product, provide the named <br />product that complies with requirements. Comparable products or substitutions for <br />Contractor's convenience will not be considered. <br />2. Manufacturer/Source: Where Specifications name a single manufacturer or source, provide <br />a product by the named manufacturer or source that complies with requirements. <br />Comparable products or substitutions for Contractor's convenience will not be considered. <br />3. Products: <br />a. Restricted List: Where Specifications include a list of names of both manufacturers <br />and products, provide one of the products listed that complies with requirements. <br />Comparable products or substitutions for Contractor's convenience will not be <br />considered unless otherwise indicated. <br />b. Nonrestricted List: Where Specifications include a list of names of both available <br />manufacturers and products, provide one of the products listed, or an unnamed <br />product, that complies with requirements. Comply with requirements in <br />"Comparable Products" Article for consideration of an unnamed product. <br />4. Manufacturers: <br />a. Restricted List: Where Specifications include a list of manufacturers' names, provide <br />a product by one of the manufacturers listed that complies with requirements. <br />Comparable products or substitutions for Contractor's convenience will not be <br />considered unless otherwise indicated. <br />b. Nonrestricted List: Where Specifications include a list of available manufacturers, <br />provide a product by one of the manufacturers listed, or a product by an unnamed <br />manufacturer, that complies with requirements. Comply with requirements in <br />"Comparable Products" Article for consideration of an unnamed manufacturer's <br />product. <br />5. Basis-of-Design Product: Where Specifications name a product, or refer to a product <br />indicated on Drawings, and include a list of manufacturers, provide the specified or <br />indicated product or a comparable product by one of the other named manufacturers. <br />DocuSign Envelope ID: 7D9ACD4F-8F6C-42B6-9ADB-C60032DB6D03