Orange County NC Website
Browse       Search
9/2/2020 <br /> <br /> 014000 - 6 <br />4. Where quality-control services are indicated as Contractor's responsibility, submit a <br />certified written report, in duplicate, of each quality-control service. <br />5. Testing and inspecting requested by Contractor and not required by the Contract <br />Documents are Contractor's responsibility. <br />6. Submit additional copies of each written report directly to authorities having jurisdiction, <br />when they so direct. <br />C. Manufacturer's Field Services: Where indicated, engage a factory-authorized service <br />representative to inspect field-assembled components and equipment installation, including <br />service connections. Report results in writing as specified in Section 013300 "Submittal <br />Procedures." <br />D. Manufacturer's Technical Services: Where indicated, engage a manufacturer's technical <br />representative to observe and inspect the Work. Manufacturer's technical representative's services <br />include participation in preinstallation conferences, examination of substrates and conditions, <br />verification of materials, observation of Installer activities, inspection of completed portions of <br />the Work, and submittal of written reports. <br />E. Retesting/Reinspecting: Regardless of whether original tests or inspections were Contractor's <br />responsibility, provide quality-control services, including retesting and reinspecting, for <br />construction that replaced Work that failed to comply with the Contract Documents. <br />F. Testing Agency Responsibilities: Cooperate with Architect, Commissioning Authority and <br />Contractor in performance of duties. Provide qualified personnel to perform required tests and <br />inspections. <br />1. Notify Architect, Commissioning Authority, and Contractor promptly of irregularities or <br />deficiencies observed in the Work during performance of its services. <br />2. Determine the location from which test samples will be taken and in which in-situ tests are <br />conducted. <br />3. Conduct and interpret tests and inspections and state in each report whether tested and <br />inspected work complies with or deviates from requirements. <br />4. Submit a certified written report, in duplicate, of each test, inspection, and similar quality- <br />control service through Contractor. <br />5. Do not release, revoke, alter, or increase the Contract Document requirements or approve <br />or accept any portion of the Work. <br />6. Do not perform any duties of Contractor. <br />G. Associated Services: Cooperate with agencies performing required tests, inspections, and similar <br />quality-control services, and provide reasonable auxiliary services as requested. Notify agency <br />sufficiently in advance of operations to permit assignment of personnel. Provide the following: <br />1. Access to the Work. <br />2. Incidental labor and facilities necessary to facilitate tests and inspections. <br />3. Adequate quantities of representative samples of materials that require testing and <br />inspecting. Assist agency in obtaining samples. <br />4. Facilities for storage and field curing of test samples. <br />5. Delivery of samples to testing agencies. <br />6. Preliminary design mix proposed for use for material mixes that require control by testing <br />agency. <br />DocuSign Envelope ID: 7D9ACD4F-8F6C-42B6-9ADB-C60032DB6D03