Orange County NC Website
Browse       Search
9/2/2020 <br /> <br /> 014000 - 4 <br />1. Name, address, and telephone number of technical representative making report. <br />2. Statement on condition of substrates and their acceptability for installation of product. <br />3. Statement that products at Project site comply with requirements. <br />4. Summary of installation procedures being followed, whether they comply with <br />requirements and, if not, what corrective action was taken. <br />5. Results of operational and other tests and a statement of whether observed performance <br />complies with requirements. <br />6. Statement whether conditions, products, and installation will affect warranty. <br />7. Other required items indicated in individual Specification Sections. <br />C. Factory-Authorized Service Representative's Reports: Prepare written information documenting <br />manufacturer's factory-authorized service representative's tests and inspections specified in other <br />Sections. Include the following: <br />1. Name, address, and telephone number of factory-authorized service representative making <br />report. <br />2. Statement that equipment complies with requirements. <br />3. Results of operational and other tests and a statement of whether observed performance <br />complies with requirements. <br />4. Statement whether conditions, products, and installation will affect warranty. <br />5. Other required items indicated in individual Specification Sections. <br />D. Permits, Licenses, and Certificates: For Owner's records, submit copies of permits, licenses, <br />certifications, inspection reports, releases, jurisdictional settlements, notices, receipts for fee <br />payments, judgments, correspondence, records, and similar documents, established for <br />compliance with standards and regulations bearing on performance of the Work. <br />1.7 QUALITY ASSURANCE <br />A. General: Qualifications paragraphs in this article establish the minimum qualification levels <br />required; individual Specification Sections specify additional requirements. <br />B. Manufacturer Qualifications: A firm experienced in manufacturing products or systems similar <br />to those indicated for this Project and with a record of successful in-service performance, as well <br />as sufficient production capacity to produce required units. <br />C. Fabricator Qualifications: A firm experienced in producing products similar to those indicated for <br />this Project and with a record of successful in-service performance, as well as sufficient <br />production capacity to produce required units. <br />D. Installer Qualifications: A firm or individual experienced in installing, erecting, or assembling <br />work similar in material, design, and extent to that indicated for this Project, whose work has <br />resulted in construction with a record of successful in-service performance. <br />E. Professional Engineer Qualifications: A professional engineer who is legally qualified to practice <br />in jurisdiction where Project is located and who is experienced in providing engineering services <br />of the kind indicated. Engineering services are defined as those performed for installations of the <br />system, assembly, or product that are similar in material, design, and extent to those indicated for <br />this Project. <br />DocuSign Envelope ID: 7D9ACD4F-8F6C-42B6-9ADB-C60032DB6D03