Orange County NC Website
Browse       Search
9/2/2020 <br /> <br /> 013300 - 6 <br />2. Identification: Attach label on unexposed side of Samples that includes the following: <br />a. Generic description of Sample. <br />b. Product name and name of manufacturer. <br />c. Sample source. <br />d. Number and title of applicable Specification Section. <br />e. Specification paragraph number and generic name of each item. <br />3. For projects where electronic submittals are required, provide corresponding electronic <br />submittal of Sample transmittal, digital image file illustrating Sample characteristics, and <br />identification information for record. <br />4. Disposition: Maintain sets of approved Samples at Project site, available for quality-control <br />comparisons throughout the course of construction activity. Sample sets may be used to <br />determine final acceptance of construction associated with each set. <br />a. Samples that may be incorporated into the Work are indicated in individual <br />Specification Sections. Such Samples must be in an undamaged condition at time of <br />use. <br />b. Samples not incorporated into the Work, or otherwise designated as Owner's <br />property, are the property of Contractor. <br />5. Samples for Verification: Submit full-size units or Samples of size indicated, prepared from <br />same material to be used for the Work, cured and finished in manner specified, and <br />physically identical with material or product proposed for use, and that show full range of <br />color and texture variations expected. Samples include, but are not limited to, the <br />following: partial sections of manufactured or fabricated components; small cuts or <br />containers of materials; complete units of repetitively used materials; swatches showing <br />color, texture, and pattern; color range sets; and components used for independent testing <br />and inspection. <br />a. Number of Samples: Submit one sets of Samples. Architect will retain one. <br />1) Submit a single Sample where assembly details, workmanship, fabrication <br />techniques, connections, operation, and other similar characteristics are to be <br />demonstrated. <br />E. Coordination Drawing Submittals: Comply with requirements specified in Section 013100 <br />"Project Management and Coordination." <br />F. Contractor's Construction Schedule: Comply with requirements specified in Section 013200 <br />"Construction Progress Documentation." <br />G. Application for Payment and Schedule of Values: Comply with requirements specified in Section <br />012900 "Payment Procedures." <br />H. Test and Inspection Reports and Schedule of Tests and Inspections Submittals: Comply with <br />requirements specified in Section 014000 "Quality Requirements." <br />I. Qualification Data: Prepare written information that demonstrates capabilities and experience of <br />firm or person. Include lists of completed projects with project names and addresses, contact <br />information of architects and owners, and other information specified. <br />J. Welding Certificates: Prepare written certification that welding procedures and personnel comply <br />with requirements in the Contract Documents. Submit record of Welding Procedure Specification <br />and Procedure Qualification Record on AWS forms. Include names of firms and personnel <br />certified. <br />DocuSign Envelope ID: 7D9ACD4F-8F6C-42B6-9ADB-C60032DB6D03