Orange County NC Website
Browse       Search
cut to be altered by more than 1". In this case, either the Department or the Contractor <br />may request an adjustment in unit price in accordance with Article 104-3. In <br />administering Article 104-3, the Department will give no consideration to value given to <br />RAP due to the deletion or reduction in quantity of milling. Article 104-3 will not apply <br />to the item of Incidental Milling. <br />For each square yard that the Engineer directs to be milled, including, but not limited to, <br />the mainline, turn lanes, bus loading and unloading areas, widening for bus or truck <br />U-turns, shoulders, intersections and crossovers requiring any additional equipment <br />necessary to remove pavement in the area of manholes, water valves, curb, gutter and <br />other obstructions, compensation will be made at the contract unit price per square yard <br />for Milling Asphalt Pavement, __" Depth or Milling Asphalt Pavement, __" to __". <br />(C) Incidental Milling <br />Where the Contractor is required to re-mill areas that are not due to the Contractor’s <br />negligence and whose length is less than 100 ft or butt joints that are not a portion of the <br />milling areas outlined in Subarticle 607-5(B), measurement will be made as provided in <br />Subarticle 607-5(A) for each cut he is directed to perform. Where the Contractor elects <br />to make multiple cuts to achieve the final depth, no additional measurement will be made. <br />Compensation will be made at the contract unit price per square yard for Incidental <br />Milling. <br />(D) Milling of Defects <br />If defects are determined to be the result of the Contractor's negligence, then <br />measurement for the re-milling or repairs will not be made. If the Engineer directs <br />re-milling of an area that is equal to or greater than 100 ft and is not due to the <br />Contractor's negligence, the re-milled area will be measured as provided in <br />Subarticle 607-5(A) and paid at the contract unit price per square yard for Milled Asphalt <br />Pavement, __" Depth or Milling Asphalt Pavement, __" to __". <br />Payment will be made under: <br />Pay Item Pay Unit <br />Milling Asphalt Pavement, __" to __" Square Yard <br />Incidental Milling Square Yard <br />PAINT <br />Application Equipment <br />The equipment to apply paint to pavements shall be a truck mounted pneumatic or airless <br />spray machine with suitable arrangements of atomizing nozzles and controls to obtain the <br />specified markings. Paint pavement markings application equipment shall be capable of <br />placing double solid lines, single solid lines, intermittent skip lines or a combination of <br />solid and intermittent skip lines in a single pass. This equipment shall also have <br />an internal timing mechanism for measurement and controlled output of required line lengths. <br />The paint applicator equipment shall have at least two paint tanks with a minimum 60 gallon <br />capacity. <br />107 <br />DocuSign Envelope ID: 797C32F6-C1CE-44EB-BF17-813A5939396C