Orange County NC Website
Browse       Search
2782 1 HVAC SYSTEMS: STANDARD SPECIFICATIONS N/C <br />2783 1 <br />2784 1 12 VDC multi-speed exhaust fan at rear of module <br />2785 1 1 static air intake at front curbside of module <br />2786 1 Floor-level return air plenum with replaceable filter for A/C-heat unit <br />2787 1 <br />2788 1 HVAC SYSTEMS: OPTIONS <br />2789 1 <br />2790 (1 )* Relocate the HVAC system from over the R4 to the center of the bulkhead. <br />2792 (1 )* Discharge the HVAC system down the length of the patient compartment in 1,044.70 1,044.70 <br />2793 1 the ceiling via the "center trough". <br />2795 1 Ford F-series and Dodge Type I Chassis <br />2796 1 12 Volt HVAC systems: <br />2797 (1 ) Heavy duty combination heater / air conditioner system w / digital electronic thermostat with N/C <br />2798 1 digital temperature display. <br />2799 (1 )* Add a second 12 VDC engine mounted compressor for dual independent 2,382.68 2,382.68 <br />2800 1 12 VDC compressors for cooling the cab and module individually. <br />2802 (1 )* Add external A/C condenser mounted on front of module - Do not paint 1,313.53 1,313.53 <br />2897 1 <br />2898 1 CUSTOMER NOTES / SPECIAL REQUESTS <br />2899 1 ** REF. Line 2792: Clarification: A/C ducting and vents in the ceiling will be for the 0.00 <br />2900 1 secondary A/C system and not the main unit over the ALS.0.00 <br />2901 1 ** Clarification: Both A/C systems will have 3-fan condensers.0.00 <br />2903 1 ** Ensure there is insulative wrap on freon lines from the OEM chassis condenser to 231.75 <br />2904 1 12" past the engine on the right side to protect lines from engine heat.0.00 <br />2905 1 ** REF. Line 2914: (1) fire extinguisher to be mounted in the L1 compartment 2" from 0.00 <br />2906 1 the back corner, forward wall of the compartment and (1) above the counter at the 0.00 <br />2907 1 pass-thru, on the wall adjacent to the L4 compartment wall.0.00 <br />2908 1 <br />2910 1 FIRE EXTINGUISHER: OPTIONS <br />2912 (2 ) 5# ABC fire extinguishers N/C <br />2914 1 * Extinguisher mounting instructions:See line #2905 <br />2969 1 <br />2970 1 SPECIAL REQUIREMENTS and/or OUTSOURCED ITEMS: <br />2971 1 ( to be provided by Excellance ) <br />2972 1 ** NCSA FEE.2,232.30 <br />2995 1 <br />2996 1 CUSTOMER SUPPLIED PARTS <br />2998 1 It is Excellance policy for all parts to be supplied by Excellance. The reasons for this policy <br />2999 1 are to allow Excellance: (1) to better engineer and manufacture the vehicle by obtaining the <br />3000 1 parts in advance, (2) provide better control over tracking the delivery of all parts and getting the <br />3001 1 part to the correct vehicle for which it is intended, and (3) it allows Excellance to better adhere to <br />3002 1 its production schedule. Disruptions in our production schedule are very costly and wasteful in <br />3003 1 terms of labor. Therefore, exceptions to this policy will result in a charge of $250.00 per part <br />3004 1 supplied by any dealer or customer PLUS the appropriate labor charge for installing any such part. <br />3005 Note: Excellance does not warrant the installation of customer supplied parts installed by Excellance! <br />3006 1 Excellance waives the $250 "parts charge" for two-way radio equipment, radio antenna, and cots. <br />3050 1 <br />3051 1 Payment Terms: <br />3052 1 <br />3053 1 Payment to be Cash Upon Delivery F.O.B. Excellance, Madison, Alabama. <br />3054 1 <br />3066 1 CHECKLIST <br />3067 1 Send invoices to: <br />3068 1 <br />3069 1 <br />3070 1 <br />3073 1 <br />3074 1 Specify to whom the MSO is to be assigned: <br />3075 1 <br />3077 1 The vehicle will be ready for delivery with electrical diagrams, cleaned, inspected, fuel tanks full, <br />3078 1 vehicle serviced, certified weight ticket, and copies of all warranties and owners manuals. <br />3079 1 <br />AQ Version 19.4 (Rev. A) Page 14 of 15 1/25/2023 4:34 PM <br />DocuSign Envelope ID: 1C3F222D-70AB-4BCA-8B30-AD386869ED9F