Orange County NC Website
Browse       Search
Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express <br />written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. <br />CL3100.14 45237 05/22 <br />How To Specify <br />CL3100 Series <br />All locksets shall be CL3100 Series Vandal Resistant Lever Locksets as manufactured by Corbin Russwin Architectural Hardware. <br />A single lock chassis shall accommodate 1-3/4" (44mm) to 2-1/4" (57mm) door thickness. Locksets shall be non-handed. <br />Locksets shall be able to withstand 3000 inch pounds of torque applied to the locked lever without gaining access. <br />Locksets shall have solid cast levers without plastic fillers. Outside lever handles shall be a minimum of 4-5/8" (117mm) in length and <br />shall provide a minimum of 2" (51mm) clearance from the surface of the door to the inside of the lever at the midpoint. Outside lever <br />handles may return to within 1/2" (13mm) of the door surface. Levers on keyed locksets shall be removable only when the designated <br />key is in the cylinder. <br />Locksets shall be able to fit a standard 2-1/8" (55mm) bore without the use of thru-bolts. Standard rose size shall be 3-1/2" (89mm) in <br />diameter. <br />Latchbolt head shall be one piece stainless steel. Latchbolt assembly shall be encased within the lock body. <br />Lockset shall have 2-3/4" (70mm) backset, standard. <br />A single lockset shall accommodate a 6 or 7-pin conventional cylinder and all levers of master keying, construction master keying, <br />visual key control, security, high security and interchangeable core. Cylinders may be easily changed by removing the lever without <br />disassembling the lockset. <br />Locksets required for fire doors shall be listed by UL for ratings of A label (3 hours) and less, for doors up to 4'0" (1.2m) x 10'0" (3m) <br />and pairs of doors 8'0" (2.4m) x 10'0" (3m). A 3/4" (19mm) throw Latchbolt for pairs of fire doors shall be standard. <br />Locksets shall be cycle tested per ANSI/BHMA A156.2, to eight (8) million cycles without any visible lever sag. <br />Certification: <br />Exceeds ANSI/BHMA A156.2 Series 4000, Grade 1 <br />UL and cUL listed to Canadian safety standards <br />UL-cUL listed for 3 Hour doors <br />All levers conform to ADA requirements for barrier free accessibility <br />Meets UL 10C and UBC 7-2 <br />UL Listed: ANSI/SDI-BHMA A250.13;ANSI/ASTM E330-2002 <br />ANSI/ASTM 31886-2005 & ASTM 31996-1009 <br />UL Certification Directory ZHEM.R21744 Latching Hardware <br />Listed on Florida Building Code Website: FL4351-R1 <br />Meets ANSI A117.1 Accessibility Code. <br />California State Reference Code (formerly Title 19, Cal. State Fire Marshal Standard). <br />Lockset shall carry a ten (10) year limited warranty. <br />CL3100 Series <br />Suggested Specification <br />DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B