Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br /> <br />INTERIOR ARCHITECTURAL WOODWORK 064023 - 10 <br />b. Patterns, matte finish. <br />D. Edge Treatment: Same as laminate cladding on horizontal surfaces <br />E. Core Material: Particleboard or medium-density fiberboard <br />F. Core Material at Sinks: Medium-density fiberboard made with exterior glue <br />G. Backer Sheet: Provide plastic-laminate backer sheet, Grade BKL, on underside of countertop <br />substrate. <br />H. Paper Backing: Provide paper backing on underside of countertop substrate. <br />2.10 CLOSET SHELVING <br />A. Closet shelving shall be open wire shelving, maximum 1” X 1” weave. Basis of design is Closet <br />Maid shelving, S&R closet shelving. <br />B. Shelves shall be 16” deep, longest width to fit each closet completely. Standard widths to include <br />4’, 6’, 8’ and 12’. <br />1. Shelves to me vinyl coated white. <br />2. Include end caps for all exposed wire ends. <br />3. Shelves to be steel, 90% minimum recycled material content. <br />C. Hardware: Provide hardware as specified by manufacturer for maximum load requirements. <br />1. Use 12” support brackets at 3’ O.C. maximum. Use expansion anchors for attaching <br />brackets to wall. <br />2. Use wall clips at 1’ O.C. maximum. <br />D. Scope: <br />1. Provide one shelf at 6’ aff of this specified shelving at closets in rooms: 114, 120.1, 120, <br />above washers and dryers in room 211. <br />2.11 SHOP FINISHING <br />A. Grade: Provide finishes of same grades as items to be finished. <br />B. General: Shop finish transparent-finished interior architectural woodwork at fabrication shop as <br />specified in this Section. Refer to Division 09 painting Sections for finishing opaque-finished <br />architectural woodwork. <br />C. Shop Priming: Shop apply the prime coat including backpriming, if any, for[ transparent-finished] <br />items specified to be field finished. Refer to Division 09 painting Sections for material and <br />application requirements. <br />D. Preparation for Finishing: Comply with referenced quality standard for sanding, filling <br />countersunk fasteners, sealing concealed surfaces, and similar preparations for finishing <br />architectural woodwork, as applicable to each unit of work. <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2