Orange County NC Website
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br /> <br />INTERIOR ARCHITECTURAL WOODWORK 064023 - 8 <br />2.5 INTERIOR STANDING AND RUNNING TRIM FOR TRANSPARENT FINISH. <br />A. Grade: Premium <br />B. Wood Species and Cut: Chestnut Oak, quartersawn white oak <br />1. Provide split species on trim that faces areas with different wood species, matching each <br />face of woodwork to species and cut of finish wood surfaces in areas finished. <br />C. For trim items wider than available lumber, use veneered construction. Do not glue for width. <br />D. Backout or groove backs of flat trim members and kerf backs of other wide, flat members, <br />except for members with ends exposed in finished work. <br />2.6 INTERIOR STANDING AND RUNNING TRIM , FRAMES AND JAMBS FOR OPAQUE <br />FINISH <br />A. Grade: Premium. <br />B. Wood Species: Any closed-grain hardwood <br />C. Backout or groove backs of flat trim members and kerf backs of other wide, flat members, except <br />for members with ends exposed in finished work. <br />2.7 WOOD CABINETS FOR TRANSPARENT FINISH <br />A. Grade: Premium <br />B. AWI Type of Cabinet Construction: Flush overlay <br />C. Wood Species and Cut for Exposed Surfaces: As indicated in Interior Cabinetry Details and Lobby <br />Casework Details <br />1. Grain Direction: As indicated in Interior Cabinetry Details and Lobby Details <br />2. Matching of Veneer Leaves: Book <br />3. Veneer Matching within Room: Provide cabinet veneers in each room or other space <br />from a single flitch with doors, drawer fronts, and other surfaces matched in a sequenced <br />set with continuous match where veneers are interrupted perpendicular <br />D. Semiexposed Surfaces: Provide surface materials indicated below: <br />1. Surfaces Other Than Drawer Bodies: See Interior Cabinetry Details <br />2. Drawer Sides and Backs: Metabox or equal- see Interior Cabinetry Details <br />3. Drawer Bottoms: [Hardwood plywood] . <br />E. Semiexposed Surfaces: Provide surface materials indicated below: <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2